您要查找的是不是：
- Interfacial adhesion strength of composite is characterized by the methods of torsional braid analysis. 使用扭辫分析对复合材料界面粘合强度进行了表征。
- Although enhanced interfacial adhesion was unfavorable to the crystallization of PET/PA 66 blends, it improved app... 虽然界面粘结的改善不利于PET／尼龙66共混物的结晶，但是它明显提高了共混物的力学性能。
- This indicates that the interfacial adhesion between the glass beads and the LPDE matrix is good. 结果还表明,微珠与基体之间的界面粘合状况良好。
- Low sputtering power results in less compact A1 film and weak interfacial adhesion, whereas high sputtering power overheats and considerably bends the composite films. 结果表明：溅射功率是决定复合薄膜质量的重要因素，功率过低得不到致密的铝层结构，而且铝层容易从氟塑料表面脱离，功率过高则会产生很强的热效应而使复合薄膜弯曲。
- To enhance the interfacial adhesion between the carbon fibers and the epoxy resin matrix,the phenolic resin surface treatment agent is used. 采用酚醛树脂作为炭纤维表面处理剂,可以显著提高多种炭纤维和环氧树脂界面强度。
- The interfacial adhesion of unsized and sized carbon fiber with different sizing agents and matrix can be characterized by single fiber fragment test. 本文通过单纤维碎裂法,分别对未上浆及不同上浆剂处理的碳纤维与基体的界面粘结性进行表征。
- The results show that to enhance the interfacial reaction by radiation is an effective method for improving the interfacial adhesion between th... 结果表明，辐射增强界面反应方法是改善不相容聚合物共混物界面粘接的有效途径。
- The result indicated that the inhibitors could enhance the interfacial adhesion in certain degree, but could also deduce the crystallinity as well as the thermostability. 结果表明：抑制剂的加入能在一定程度上提高体系的结晶度、界面粘结以及热稳定性。
- Through compatibilization, PP/PS composite could not only improve uniformity in its phase morphology, but also strengthen its interfacial adhesion between the phases. PP/PS共混物通过增容可以改善共混物相形态和提高界面粘结.
- Ion bombardment promotes interfacial diffusion and enhances interface adhesion. 也可借助离子的轰击作用形成结合良好的扩散过渡层；
- The Interfacial adhesion of metal fibre-reinforced epoxy resin was improved significantly after the aclivated treatment of metal fibre by hydrochloric acid and acetic acid. 采用盐酸和乙酸对金属纤维表面进行活化处理后,使之与环氧树脂的粘结性大为改善。
- Chien, C.H., Weng, D.J., Chiou, Y.T., Tsai, M.L. and Chen, Y.C., 2002, "The Effect of Moisture on the Interfacial Adhesion of IC Packages," International Symposium on Experimental Mechanics, Taipei, Taiwan, pp. 1-6. 钱志回、谢其昌、陈永昌、吴以德、周业兴、杨世豪、蔡宗宪、许呈宇，2002，?接合填充胶/防焊漆/基板经温度循环黏著强度之研究?，第二十六届全国力学会议，云林，第1-11页。
- The proposed damage competition group criterion ( D a) is applied to discuss the effect of morphology parameters and interfacial adhesion on brittle ductile transition ( BDT ) of polymer blends. 应用前文提出的聚合物共混体脆韧转变（BDT）的损伤竞争准数（Da）判据，研究了共混体分散相形态与界面粘接对BDT的影响。
- As compared with untreated nano-particles, the coupling agents treatment could enhance the interfacial adhesion strength between PVC and nano-particles, but the nano-particles are still dispersed in PVC matrix as aggregated particles. 偶联剂处理虽能对复合体系的界面粘结强度有所改善，对体系有一定的增强作用，但不能有效地解决无机纳米粒子的聚集问题。
- The results showed that titanate coupling agent improved the interfacial adhesion between PPESK and nano-CaCC>3. The variety of the glass transition temperatures for composites was not evidence, but 5% weight loss temperatures increased distinct. 随着GF含量的增加,复合材料的玻璃化转变温度和T_(5%25)都有所提高。
- The experimental results showed that HSPS can improve the interfacial adhesion between PA1010 and PS phase and enhance their compatibility, resulting in the higher notched impact strength for PA1010/PS/HSPS ternary blends. 结果表明，HSPS的加入显著改善了PS与PA1010的相容性，加强了界面粘结，使共混物缺口冲击强度明显提高，实现了PS增韧PA1010的目标。
- The high quality(Cr,Ti,Al)N films were found to display many strengths,including small crystal grain size,fast deposition rate,high micro-hardness(35 GPa),and strong interfacial adhesion(80 N). 结果表明:用此法制备的薄膜为含有多相结构的(Cr,Ti,Al)N多元硬质膜,晶粒细小,沉积速率快,显傲硬度高达35 GPa,结合强度高度达80 N,综合性能优异。
- The results show that proper control the motion mode of the particle in plating results in many strengths of the nickel films,such as good uniformity,high compactness,and strong interfacial adhesion. 溅射镀膜时,通过控制空心微珠的运动方式,在空心微珠表面沉积了一层均匀性好、附着力强和致密性好的金属镍膜。
- With this epoxy resin as matrix resin, the matrix has strong interfacial adhesion with the glass fiber, the NOL ring shows good mechanical properties, at the same time, the pressure vess... 树脂浇铸体力学性能优良,与玻璃纤维之间粘结良好,NOL环复合材料力学性能好,产品爆破强度高。
- It is found that the AT particles have no effect on the polymerization of PMMA, the PMMA coating on the AT enhances the interfacial adhesion, the tensile strength is found to be... 结果表明,通过超声波分散的方法可以得到凹凸棒土纳米棒晶,凹凸棒土对MMA无阻聚作用,表面包覆的聚甲基丙烯酸甲酯(PMMA)能有效地解决复合材料的界面粘接,提高复合材料的性能。
