您要查找的是不是:
- However, the GCL always is used with many materials together, so studying the interface shear strength of the GCL and other material is necessary too. 在建设工程的使用中,GCL经常和很多种土工合成材料复合使用发挥各自的优越性,所以,研究GCL与其他土工合成材料界面之间的摩擦性能也很有必要。
- In order to accomplish the inner and interface shear strength of GCL and the application of test results in municipal solid waste landfill, a series of research work has been done as follows: 1. 本文为了完成对GCL内部和界面摩擦特性的研究以及研究成果在垃圾填埋场中的应用,进行了以下研究工作: 1.在已有土工试验应变式控制直剪仪的基础上研制了土工合成材料直剪仪;
- The influence of the treatment conditions on the properties of carbon fibre and that of sizing and size technology on the interfacial shear strength(ILSS)are also described. 同时还介绍了轧液型上浆剂并对上浆工艺作了探讨。
- The results show that the inter lamination shear strength and interfacial shear strength of composites improve after being dipped in boiling water, and they increase with boiling time going on. 结果表明,经沸水浸泡后的复合材料层间剪切强度和界面剪切强度均有所提高,且随水煮时间的延长而增大;
- Interfacial shear strength(IFSS); 多聚磷酸;
- interface shear strength 界面强度准则
- Stress Singularity of Interface end and Analsys of Discrepancy Among Interfacial Shear Strength 界面端应力奇异性与复合材料界面剪切强度细观实验分散性分析
- Indirect methods to measure the interface bond strength include the interlaminar shear strength test. 测量界面粘结强度的间接方法包括层间剪切强度试验。
- MEASUREMENT OF THE INTERFACIAL SHEAR STRENGTH IN SiC(CVD)/Al COMPOSITES SiC(CVD)/Al复合材料界面剪切强度的测试
- Keywords polypropylene;glass fiber;interface;transcrystallization;interfacial shear strength; 聚丙烯;玻璃纤维;界面;横晶;界面剪切强度;
- Effect of Laser-quenched Substrate on Interfacial Shear Strength of Chromium Plated Coatings 基体激光淬火对镀铬层界面剪切强度的影响
- FEM Modeling of Interfacial Shear Strength in SiC-Fibre Reinforced Titanium Matrix Composites 纤维增强钛基复合材料界面剪切强度的FEM分析
- The drawing test results show that the shear strength of the interface is not proportional to the normal stress because of its dilatancy behavior due to shear application. 土工布拉拔试验结果表明,由于土与土工织物接触面的剪胀造成该类接触面的抗剪强度与法向应力不再是线性关系;
- The effect of argon plasma conditions on the fibers' interface property was studied by comparing the changes of the strength of fiber bundle and the interlaminar shear strength. 观察处理后纤维束纵向的微观结构,测试用最优化工艺参数处理的纤维束制成的纤维增强复合材料的单向性能,进一步论述等离子体处理对纤维束黏合性能的影响。
- Keywords PBO fiber;polyphosphoric acid(PPA)/acetic acid;coupling agent;interfacial shear strength(IFSS); PBO纤维;多聚磷酸/乙酸;偶联剂:界面剪切强度;
- Keywords shear surface;fractal dimension;coarsen treatment;interfacial shear strength; 剪切撕裂表面;分形维数;打毛处理;界面剪切强度;
- Keywords silane coupling agent;polypropylene;glass fiber;interfacial shear strength; 硅烷偶联剂;聚丙烯;玻璃纤维;界面剪切强度;
- Touch and close fasteners - Determination of longitudinal shear strength. 粘接拉链。纵向剪切强度的测定。
- The results show that the shear strength of COF is higher than that of COG. 结果表明 :COF比 COG的剪切强度高 .
- The interfacial shear stress is a constant proportion of the bottom shear. 交界面的剪力与底部剪力之比是常数。
- 今日热词
-
- 深远海浮式风电平台 - deep-sea floating wind power platform
-
- 京雄高速公路 - Beijing-Xiongan expressway
-
- 农业及相关产业增加值 - the added value of agriculture and related industries