您要查找的是不是:
- inlet valve tappet 进气门挺杆
- The tightness test of inlet valve for emergency fire pump. 应急消防泵进水阀密性试验。
- Close the cold water inlet valve and open a nearby hot water faucet. 关闭冷水进水阀,打开附近的热水水龙头。
- The reason of the formation of gas porosities and cracks on the head face of valve tappet has been studied. 本文分析了气门挺杆端面气孔、裂纹形成原因。
- We are international Sourcing Office of a famous Germany Truck Maker, we are interested in Valve Tappet for truck and bus in China. 1在自营进出口权,并且有直接出口经验.;2有给国内外著名汽车制造厂\\发动机厂做配套的经验。
- In 1998, our product - Muffler Guard - were shipped to B&S company in the U.S.A; October the same year, product - Valve Tappet - were shipped to MHI company in Japan. 华文中宋1998年公司生产的消声器防护网罩开始出口美国B&S公司,同年10月生产的气门挺柱销往日本三菱重工。
- Lift retainer and check assembly from valve body. To assist with removal a small flow can be applied by "cracking" the inlet valve slightly. 从阀体内取出固定器和止回模块。可以通过稍微“开裂”阀门进口来帮助清除少量的流体残留。
- Install the hydraulic valve tappets. 安装液压气门挺杆。
- To assist with removal a small flow can be applied by "cracking" the inlet valve slightly. 为了有助于拆卸,可以通过轻微"分裂"阀门进口来产生一小股流体。
- When the piston nears the top of this stroke, the inlet valve is opened and the exhaust valve closed. 随着曲轴转动,复又向上带动活塞,同时废气经由气缸头盖上的排气阀排出。
- If the drain hose does not have this rating, open the cold water inlet valve and open a nearby hot water faucet until water is no longer hot. 如果排水软管的额定温度没有达到上述要求,请打开冷水进水阀,打开附近的热水水龙头,直到水不热为止。
- The outlet valve of the plunger pump must be taken down before the inlet valve is hauled out with the former disassembling instrument for the valve. 柱塞泵的下凡尔损坏后,用原来配的凡尔拔出器拆卸时要先拆掉上凡尔,再拆卸维修下凡尔。
- If the valve fails to completely reset and continues to release water, immediately shut off the cold water inlet valve, and call a qualified service technician. 如果阀门无法完全重置,并继续释放水,则要立即关闭冷水进口阀门,打电话叫有资格认证的工程师。
- Chemical analysis and mechanical tests on the materials used for inlet valve body, disk, trunnions, servomotor cylinders, piston rods, upstream and downstream piping. 对用于进气阀阀体、阀盘、耳轴、伺服缸、活塞杆及上下游管道的材料进行化学分析和机械测试。
- Meanwhile, the problem of fast open/close of air inlet valve during air surge backwash and some default of equipment was successfully solved during commissioning. 在调试中,解决了水气反洗时要求进气阀快速开/关等问题。
- Hydraulic Valve Tappet Removal/Installation Tool 液压阀推杆拆卸/安装工具
- Keywords valve tappet;gas porosity;cracks; 气门挺杆;气孔;裂纹;
- The equipment includs: 1) Atmosphere condenser (optional item), 2) Cascade tank body(observation tank,filter tank, receiver), 3) Level gauge, 4) Level controller, 5)Ball float water inlet valve, 6) Salinometer, 7) Inlet/outlet valve, etc. 设备模块主要包括:1、大气冷凝器(可选);2、热井本体(观察柜、过滤柜、贮存柜);3、液位计;4、液位控制器;5、浮球式补水阀;6、盐度计;7、进出口阀等等组成。
- The important conclusion includes: 1. The best energy using efficiency of high-pressure gas was on the basis of the low inlet pressure and the inlet valve closed when piston was on 1/4 form TDC to BDC. 进气压力较低时,气体可用能的利用率较高;
- Perform workshop inspection of equipments/components related to hydro power field, such as rotor, generator, distributor, guided valve, inlet valve, draft tube, embedded parts, etc. 实施水电设备与零部件相关的驻厂检验,例如水轮机,发电机,活动导叶,倒水机构,进水阀门,尾水管,预埋件等等。