您要查找的是不是：
- inlet flange diameter 进口法兰直径
- A butterfly isolation valve cannot be installed directly to the valve inlet flange, as the disc will contact the orifice plate. 蝶阀隔离阀不能够直接安装在阀门进口法兰上，因为其阀瓣将会接触到节流板。
- The inlet side of the sleeve is appropriately marked with an inlet tag on the inlet flange O.D. 套管的进口端要在法兰外径上采用一个进口标签加以适当的标注。
- Direction of fanner pass in and out is located in on an axes, enter, exit flange diameter is identical. 透风机进岀目标处于一点轴线上,进、岀口法兰口径一样。
- Suction piping for all pumps shall have at least five(5) times the nominal pump suction flange diameter of straight pipe upstream of the suction nozzle. 所有水泵的吸水管道直径至少应有5倍于吸入口的上升直水管段的额定边缘直径。
- The engine-feed system interface is at the turbopump inlet flanges. 发动机与供应系统的交界是在涡轮泵的进口法兰盘处。
- Suction piping for all pumps shall have at least five (5) times the nominal pump suction flange diameter of straight pipe upstream of the suction nozzle. 所有水泵的吸水管道直径至少应有5倍于吸入口的上升直水管段的额定边缘直径。
- When used with a "raised face" flange, there will be a gap between the faces on the outer flange diameters. 如果使用“凸面”法兰，则在外法兰直径表面之间将会有间隙。
- Corresponding sizes of class 150 (aNSI B16.24) flange diameters and drilling templates are the same as those of the american Class 125 Cast Iron Flange Standard (aNSI B16.1) and of the american Class 150 Steel Flange Standard (aNSI B16.5). 与150磅级(美国国家标准协会 ansi B16.;24)法兰直径相对应的尺寸和钻孔模板;其大小和形状与美国125磅级铸铁法兰ansi B16
- The tide flushed through this narrow inlet. 潮水涌过了狭窄的小湾。
- Hub Flange - spoke hole diameter. 轴皮上穿辐条的孔的圆心所在圆的直径。
- This lens can magnify 20 diameter. 这个透镜能放大20倍。
- There's only one inlet to the parking lot. 这个停车场只有一个入口。
- The diameter of the tree-trunk is about 2 meters. 这树干的直径大约是2米。
- The axis of a circle is its diameter. 圆的轴线是其直径。
- Measure the diameter of this circle. 量一下这圆的直径。
- We must gauge the diameter of wire first. 我们必须先测量电线的直径。
- A tube with a very small internal diameter. 毛细管一根内径十分细小的管子
- He first met her in a small village on an inlet of the sea. 他在海湾边上的一个小村子里与她初次相遇。
- Inlet flange size and rating 入口法兰标准
