您要查找的是不是:
- In case of a condensing gas drive, the original reservoir fluid and the injection gas are not miscible, but miscibility may be achieved at a later time, at the injection well. 如果进行凝析气驱,注入井中的原始液体与注入气在起初是不可能混相的,但过一定时间混相则可能发生。
- The fluidizing characteristics and powder discharge process of gas fluid bed reactor with Hypol process were described. 介绍了聚丙烯流化床反应器流化特性和卸料过程;
- It is difficult that these inject gas with in place oil achieves miscible phase. 三种注入气均难以与此地层原油混相。
- It was an extraordinarily fluid ratio of exchange which would be difficult to parallel today. 那时的汇率变化非常大,今天很难想象。
- Liquid-liquid &gas jet pump is a kind of li quid jet pump which can pump two-phase liquid and gas fluid. 液-液气射流泵是一种能同时抽吸液、气两相介质的液体喷射泵。
- After some time, miscibility may be achieved between the ol and the injection gas. 一段时间后,在油和气之间出现混相。
- Gas Fluid mesh is consisted of metal wire via special craftwork,widely used in the filteration for gas,liquid and removing dust. 天然气是由铁丝网液经特殊工艺;广泛用于过滤的气体、液体、除尘.
- The analysis of computing results indicated that the electric field with corona discharge could cause turbulence in gas fluid and result in heat transfer enhancement. 对模拟结果分析表明,有电晕放电产生的电场可引起场域空间气体的“紊流”并导致换热的增强。
- Hydrogen sulfide (H2S), which makes up 2.5% of the injection gas, is particularly beneficial at helping CO2 to mix with oil. 注入气体当中大约含有2.;5%25的硫化氢气体(H2S);该气体尤其有利于CO2和石油的混合。
- Objective To establish direct injection gas chromatography for determination of N-butyl glycidyl ether in the air of workshops. 目的建立工作场所空气中正丁基缩水甘油醚的直接进样气相色谱测定方法。
- The computer emulation of the gas fluid in intake pipe is a efficiency method of researching the influence of intake pipe's shape and structure parameters upon milti-cylinder gas exchange and combustion process. 管内流场的计算机仿真是研究内燃机进气管道的形状及各结构参数和运行参数对多缸内燃机换气过程及燃烧的影响的有效方法。
- TiK's newest WIT process injects gas and water through the same nozzle. 这种方法尤其被建议用;来注射还没有针对水辅注射进行改性的普通塑料。
- Methods 36 consecutive cases(36 eyes)of macular hole including 13 cases previously performed with vitrectomy combined with gas fluid exchange were treated with argon green laser photocoagulation. 方法采用氩绿激光治疗36例36眼黄斑裂孔,其中13眼为玻璃体切割气液交换术后的补充光凝;
- By long core displacement experiment and numerical simulation, has made comparative analysis of development effect for injection water, WAG, GAW, and injection gas in PuBei oil field. 通过长岩心驱替实验和数值模拟研究,对葡北油田在注水、水气交替、气水交替、注气驱替方式下的开发效果进行了对比研究。
- Rotor blades rotate almost same speed of with same circumference speed with injected gas speed from LV pocket. 转子风叶的圆周线速度几乎与LV气室喷出的气体速度相同。
- Did you have gas or an injection? 你是用的麻醉气还是打的麻醉针?
- The influence of the injected gas volume on the output performanc e of positive displacement motor (PDM) is obvious in the process of aerated UBD. 在充气欠平衡钻井过程中,气体的注入量对马达的输出特性影响较大。
- Aiming at this problem, a novel manufacture for meter and automation for the injected gas in gaslift well was developed and applied. 针对这一问题,开发研制了气举采油配气计量自控装置。
- When injecting gas into polymer melt in extrusion from a single orifice, it is indicated that gas-melt interface formed showed three kinds of shapes: ring, round-ring, and round. 气体经单个喷嘴进入挤出机中熔体时所形成的气熔界面其形态有环状、团环状和团状三种,最常见的是团状。
- Must safflower inject fluid hit how long? 红花注射液得打多长时间?