您要查找的是不是：
- In the injection stretch blow moulding process, injection moulding machine is used to make the preform. 注拉吹工艺先用注塑机注出瓶坯。
- The disadvantages of injection stretch blow moulding is difficult to add handle and expensive preform mould, which has a long delivery time. 注拉吹的缺点是不易加手柄，注塑模具昂贵，而且交货期长。
- In the two-stage process, injection is separated from stretch blow and are performed on two different machines. 两步法将注及拉吹分离，在两台机器上分时进行。
- If the process of injection stretch and blow moulding are performed within one machine, the process is called one-stage. 在一台机内完成注、拉、吹工序的工艺叫一步法。
- If the process of injection stretch and blow moulding are performed within one machine, the process is called...e-stage. 在一台机内完成注、拉、吹工序的工艺叫一步法。
- QCS is semi-automatic stretch blow molding machine used in two-setp bottle production line. QCS半自动系列吹瓶机是一种两步法半自动吹瓶设备。
- QCS-C-1500 is automatic stretch blow moulding machine used in 2-step PET bottle production line. 1500型吹瓶机是一种二步法自动吹瓶设备。它适用于制造以PET为原料的任何形状的碳酸饮料瓶、矿泉水瓶、农药瓶、化妆瓶等。
- Especially designed for the filling of soft drinks in PET bottles: a filler-capper block, which can optionally be combined with a stretch blow molder or a rinser. 是专为填补软饮料在PET瓶：灌装，封盖机模块，可以随意加上拉吹模塑或冲洗。
- The constitutive models used in the numerical simulation of PET stretch blow molding could be classified into three types:hyperelastic,viscoelastic and viscoplastic models. 目前所采用的本构方程可分为3类1)将材料的应力-应变行为视为超弹性;
- In the second stage, room temperature preforms are reheated, stretched and blow moulded into bottles, in a reheat stretch blow moulding machine. 第二步将室温的瓶坯再加热后，拉吹成为瓶子，是在另一台“再加热，拉吹机”上完成。
- The converter makes steel in blew process, the output of CO has the very high recovery use value. 转炉炼钢在吹炼过程中,产生的co气体具有很高的回收利用价值。
- Technology of Stretch Blow Moulding PET Bottles PET瓶双向拉伸吹塑成型技术
- On-line measurement for converter process is systematically summarized, based on analyzing the BOF blowing process. 通过对转炉吹炼过程信息的分析，系统总结了转炉吹炼过程信息在线检测技术的发展。
- The effects of different modifiers on the performance of PVA film during melting blown process were studied. 研究了聚乙烯醇(PVA)在熔融吹塑薄膜加工过程中,各种改性剂对薄膜性能的影响。
- The relevant safety technique and the safety operaional procedures in cyclopentane blowing process of rigid polyurethane foam are introduced. 介绍了聚氨酯硬泡环戊烷发泡工艺中相关的安全技术和安全操作规程。
- This series compressor widely used in pneumatic lock,pneumatic tool,tire infation,blowing process,spray paint,sand liasting and fluidic element. 空气压缩机广泛用于气动夹固;风动工具;轮胎充气;吹制工艺;喷漆;喷砂;射流元件及共他需要压缩空气的场所.
- I was dazed by the blow on my head. 我的头挨了一击而觉得晕眩。
- Simulation shows that the system can stably control lance and prevent from splash and drying,so it is an effective method to control lance in blowing process. 仿真分析表明,该系统可平稳操作氧枪,抑制喷溅及返干效果较好,为转炉吹炼过程氧枪控制提供了一个有效的方法。
- The place used to be a stretch of barren land. 早先这里是一片不毛之地。
