您要查找的是不是：
- Reasonable blank shape and size can obviously improve the inhomogeneous deformation of blank and fully exploit the metal forming performance. 合理的毛坯形状和尺寸,可以明显改善冲压过程中板料变形不均匀的现象,充分发挥金属的成形性能。
- It was concluded that this defect is not surface crack indeed,but cross extruded wrinkle rising from inhomogeneous deformation. 发现这种缺陷实际并非表面开裂，而是由于变形不均匀造成的横向挤压皱折。
- The cause of die snarl-up for profiles during extruding was analyzed from the aspects of ingot,extruding condition,die and inhomogeneous deformation,etc. 从6063铝合金铸锭、挤压工艺条件、模具、金属的不均匀变形等方面分析型材挤压时发生“堵模”现象的原因;提出了其防止措施。
- The increase in the yield strength of the thinner microbeam is attributed to the increase in the strain gradient contribution due to inhomogeneous deformation of the small dimensional material. 微小悬壁梁屈服强度的升高来源于小尺度材料在非均匀变形下引起的应变梯度贡献的增加；
- Research on the Inhomogeneous Deformation Mechanism at the Rolled Edge of Plate 中厚板轧制边部不均匀变形机理的探讨
- Keywords cogged bloom;surface defect;inhomogeneous deformation;watering wrinkle; 初轧钢坯;表面缺陷;不均匀变形;水丝皱折;
- inhomogeneous deformation 不均匀变形
- Ice crystals begin to deform measurably. 冰晶就产生某种程度的变形了。
- Normally, enormous deformation is abnormal. 通常，巨大的变形是不正常的。
- Outside the strip zone, deformation is elastic. 在窄带区以外，变形是弹性的。
- Plastic deformation under spherical indenter. 球形压头下的塑料变形。
- It will deform into an elongated blob. 它会变形而成为一个拉长了的滴状体。
- Severe variations deform the discharge curves. 严重者使放电曲线发生畸变。
- Applied stress causes plastic deformation. 外加应力引起塑性形变。
- During deformation, the ferrite grains nuc... 碳含量提高有利于铁素体晶粒细化。
- She appeared to deformation of the face. 她出现了能变形的面孔。
- What can see more deformation is mitotic. 可以见到较多畸形的有丝分裂。
- Shoes that are too tight deform the feet. 太紧的鞋使脚变形。
- An example is given which is simulated by DEFORM. 并利用DEFORM软件给出了实例。
- To mar or spoil the appearance or shape of;deform. 台湾岛的形状是一个拉长的椭圆形。
