您要查找的是不是:
- Damage form is slips shear damage under impact load. 该材料在冲击下的破坏是滑移剪切破坏;
- Taking the maximum impacting load as designing object, an optimal design model of the fluid impactor is established. 以最大冲击载荷为设计目标建立了冲击器的优化计算模型并进行实例计算。
- We analyze concrete’s response to alterative load and impacting load in order realize concrete project’s dynamic monitoring. 5、测试了机敏混凝土结构的动态特性,分析了机敏混凝土结构对交变载荷和冲击载荷的响应,为实现混凝土工程结构的动态检测提供了依据。
- This article discusses the dynamic computation of the closed cylindrical shell under impact load. 本文讨论闭合圆柱形壳体在冲击荷载作用下的动力计算.
- The ability of a diamond to withstand an impact load is typically referred to as diamond impact strength. 能否经受冲击负荷的钻石通常称为金刚石冲击强度。
- Crack initiation and propagation process in A356 aluminium alloy under impact load have been investigated. 研究了A356铝合金在冲击载荷作用下的裂纹萌生及其扩展过程。
- When mass ratio is constant, the peak value of impact load is proportional to the velocity. 在质量比不变的情况下,冲击荷载的峰值与初速度成正比;
- It is more attractive but not deeply discussed to talk about the reliability design of HSMS under impact load. 而在冲击载荷下弹簧质量系统的可靠性设计更是备受关注但讨论不够深入的课题。
- Because of the special arrangement, the blade can continuously thrash water during running, which reduces the impact load raise the operation stability. 由于叶片在主轴上的特殊排列,使得运行时叶片连续击水,减少了冲击载荷,提高了运行稳定性。
- On the other hand, as an instant impact load with controllable energy, dynamic compaction is a good test in-situ for the study of soil dynamics. 另外,作为一种能量可控的瞬态冲击荷载,强夯施工可以作为一个可控的土动力学原位试验。
- By solving the dynamic buckling equation numerically, the effect of pre-load, impact yate and geometrical imperfection on critical impact load is studied. 文中考查了静力预载荷、冲击载荷速度以及初始几何缺陷对临界冲击载荷的影响。
- With the I- DEAS, this article establishes the finite element m odel of the boarding lounge, and analyses the dynamic respond when the model enc ounters the changed impacting load of the pressure cylinder and the wind load. 这里运用I-DEAS建立了残疾旅客登机车的有限元模型,对所建模型进行了模态分析,并进一步分析了模型在液缸换级和承受风载荷时的动态响应。
- Under the 2.0J impact load, the wear resistance of the composite containing 40%(vol.%) TiC is 1.3 times of Hadfield steel . 在2.;0焦耳的冲击载荷下,含TiC体积分数为40%25的复合材料的耐磨性是高锰钢1
- Unwanted steering kickback and vibrations are reduced with the addition of a solenoid valve that acts like a damper when there is a harsh impact load. 不受欢迎的指导回扣和振动降低,增加了电磁阀行为象一个阻尼器时,有一个严厉的冲击载荷。
- It has dealt with high efficiency, nitrogen and a strong ability to impact load, does not require backwashing, no plug the technological features. 它具有处理效率高、脱氮和抗冲击负荷能力强、不需要反冲洗、不发生堵塞的工艺特点。
- The results obtained showed that step-feed BNR is efficient for municipal wastewater treatment,having relatively strong bearing capability against impact load. 结果表明:采用分段进水A/O脱氮工艺处理城市污水具有较强的耐冲击负荷能力;出水水质稳定.
- The results showed that aeration time is a key element in the process of nitrification, and the technology possesses stronger resist impact load capability. 结果显示 ,曝气时间对硝化效果影响较大 ,同时 ,本工艺具有较强的抗冲击负荷能力。
- Choice of lubricant grease depends on the running condition of bearings.Such as :temperature, load, dpeed, vib ration, impact load, ambient medium influence. 而润滑的选择主要取决于轴承的运转条件,如:温度、负载、速度、振动、冲击负载、环境介质的影响。
- The flaws' forming and expanding mechanism had been analyzed and studied,that was happened on the laser coating under repeated impact load by SEM or some other methods. 对激光涂层进行了多次冲击碰撞试验,并通过SEM等手段分析研究了激光涂层在多冲碰撞载荷下的裂纹形成与扩展机理。
- In the present paper,the fractographic features of PVC(Poylvinylchlqride) material subject to tension,bending and impact load have been researched by SEM. 对聚氯乙烯在拉伸、弯曲、冲击载荷作用下的断口形貌特征进行了观察分析,在此基础上探讨了聚氯乙烯的断裂过程及机制。