您要查找的是不是:
- To produce a pre-determined depth of angle for different impact test specimen material, this device has double thickness gauges and speed adjustor for depth measurement. 简介制作冲击试验机试片之缺口用,本机可调整切口之深度并附良测之设备,本机具切削速度调整可视材料之软硬等状况调整切削速度。
- keyhole Charpy impact test specimen 钥匙形缺口冲击试样
- By changing the nolch local ion of Charpy impact test specimens studied the effect of nolch location on toughness and cracking process in multi-layer welds. 通过改变焊缝夏比冲击试样的缺口取向,研究了缺口位向对多层焊缝金属韧性及断裂过程的影响。
- This test piece shall be welded using the identical welding parameters as the original test and only weld metal impact test specimens shall be tested. 此试件应使用与原始试验相同的焊接参数进行焊接,并且仅对焊接金属冲击试样进行试验。
- Acceptance value for lateral expansion for non-standard impact test specimen of stainless steel 非标准试样冲击侧向膨胀量合格判定
- Charpy impact test specimen 却贝冲击试样
- impact test specimen 冲击试件
- Is a wedge test specimen utilized for chill or analysis control? 是否用楔型试块进行分析控制?
- All the cars must experience an impact test. 所有小汽车都必须经过碰撞试验。
- The finite element model of a small punch test specimen of 1Cr0.5Mo steel is established. 基于小冲孔蠕变试验 ;建立 1Cr0 .;5Mo耐热钢小冲孔蠕变试样的有限元模型。
- The spectr al reflectance of each test specimen is measured in situ before and after exp osures. 在辐照前后对每一个试样的光谱反射系数进行了原位测量。
- The shear strength of COG and COF bonded with ACF is studied by impact test. 摘要采用冲击试验方法研究了各向异性导电胶膜(ACF)互连的玻璃和柔性基板上倒装芯片(COG和COF)的剪切结合强度。
- The test specimen shall be immersed in the measuring electrolyte so that the top edge of the area to be measured is level with the surface. 测试样本应浸在电解液中,并使测量区的顶端与液面持平。
- The test specimen may be titrated with the Reagent directly, or the analysis may be carried out by a residual titration procedure. 待测样品可能会被卡尔试剂直接滴定,或者采用回滴定法完成分析。
- Although only then several millimeters are long, but each test specimen includes several thousands has not grown the complete egg. 虽然只有几毫米长,但每个试样含有数千未发育完全卵子。
- The validity of the expression was verified by the instrumented impact test and caustic test results for HQ785C steel. 分别采用受惯性效应影响的示波冲击试验及无惯性效应的焦散线技术对HQ785C钢进行了动态测试,验证了修正公式的有效性。
- Report the viscometer model and spindle, the apparent viscosity at the spindle/speed used, and the test specimen temperature. 记录粘度和锭子,外观的粘度在锭子/和使用的速度,还有测试样品的温度。
- The measuring objectives are selected software controlled in dependence of the test specimen parameters, must be inserted however manually into the mount. 由软件选择样品被测参数,被测物必须用手装入装配台。
- RF assembly unavailable for impact testing as design changes delay development. 在冲击测试时RF配件无作用,在设计变更延迟发展时。
- In the second part, a test program to help improve modeling of SCBF systems is described, including the design of a nearly full-size, two-story SCBF test specimen. 在文章的第二部分描述了一个帮助轴心抗拉构件改进建模的实验程序。这部分包括一个接近实际大小的两层轴心抗拉构件的实验范例。