您要查找的是不是：
- repeated impact bending strength 反复冲击抗弯强度
- impact bending strength 冲挥曲强度,冲讳曲强度
- The Izod impact strength, the bending strength and tensile strength were tested. 同时,测试了该材料的冲击强度、弯曲强度和拉伸强度。
- Vinylon fibre can improve the bending strength, fracture energy, fracture toughness and impact toughness. 维尼纶纤维能提高复合材料的杭折强度、断裂能、断裂韧性和冲击韧度；
- The tensile strength,bending strength,impact strength,tensile modulus of elasticity and bending modulus of elasticity were determined. 测试了塑木板材的拉伸强度、弯曲强度、冲击强度、拉伸弹性模量、弯曲弹性模量等力学性能;
- E corrugated color box, box has a beautiful appearance, light weight, high bending strength, impact performance etc., are widely used in food, fruits, metal packaging industries. 瓦楞彩色包装盒、箱具有外形美观、重量轻、抗弯强度高、抗冲击性能好等优点，广泛应用于食品、水果、五金等行业的产品包装。
- Stiffness It is a measure of the bending strength of paper and board. 挺度是衡量纸和纸板耐弯曲的强度性能。
- And the SEM, tensile strength, impact strength, bend strength test is used to characterize the structure and properties of long fiber reinforced ABS composites. 用SEM、拉伸强度、弯曲强度、冲击强度等测试技术研究原位聚合制备的长纤维增强ABS复合材料的结构与性能。
- It was founded that the best bending strength was 422 MPa when aids was 18 wt%. 在助剂含量为18wt%25时，抗弯强度最大为422MPa。
- At transition region,the sea ice bending strength reached the maximum value. 海冰的弯曲强度随着应力速率的增加，经过延性、过渡和脆性三个阶段，在过渡区，海冰的弯曲强度达到最大值。
- Optimum wearresistance,high bending strength and high resistance to bonding. 耐磨性较好、较高温的抗弯强度和抗粘结能力。
- Experiments of im-pact bending strength at different impact speed were performed on two kinds of ceramics. Thetheoretical and experimental curves about the dependance of strength on impact speed werepersented. 对两种陶瓷材料进行了不同冲击速度的冲击弯曲强度测试,给出了冲击速度与冲击强度间关系的理论和实验曲线以及最大冲击力与系统固有频率的关系。
- When DAIP is prepolymerized to be gellike, the impact strength can be increased to over two times, the bending strength is slightly increased, and the heat distortion temperature (HDT) is not changed basicaly. 当DAIP预聚至凝胶状时浇铸体的冲击强度可提高2倍多,弯曲强度也有所上升,但热变形温度(HDT)变化不大;
- When both of the mass fractions of the glass fibers was 30%,the tensile strength,bending strength and impact strength of LFT-PET were 1.4,1.5 and 3 times of those of SFT-PET respectively. 结果表明：LFT-PET的各项力学性能显著优于SFT-PET;在玻纤质量分数同为30%25时;LFT-PET的拉伸强度为SFT-PET的1.;5倍;弯曲强度为SFT-PET的1
- When both of the mass fractions of the glass fibers was 30%, the tensile strength, bending strength and impact strength of LFT-PET were 1.4, 1.5 and 3 times of those of SFT-PET respectively. 结果表明：LFT-PET的各项力学性能显著优于SFT-PET，在玻纤质量分数同为30%25时，LFT-PET的拉伸强度为SFT-PET的1.;5倍，弯曲强度为SFT-PET的1
- The results showed the Izod notched impact strength of the modified PMMA increased with the increase of the content of ACR, while the tensile strength and bending strength decreased. 结果表明，随着ACR用量的增加，改性PMMA的缺口冲击强度不断增加，而拉伸强度和弯曲强度则成下降趋势。
- The wood is moderately hard and strong with high bending strength, shear strength and stiffness. 这类木材硬度适中而强壮，具有高度弯曲力、剪力和硬度。
- The Bending strength for concrete bonding was over 7MPa with ester crete-p and 8Mpa with Epcrete-p. 用epcrete p粘合的混凝土试件的抗折强度可达到 8MPa以上 .
- General bone mineral density (GBMD), femur bending strength (FBS), serum-BGP and urine-Hyp/Cr were measured. 进行相应处理后分别测定各组大鼠全身骨矿物密度(GBMD)、右侧股骨抗弯强度 (FBS)和血清骨钙素 (BGP)、尿羟脯氨酸 (U -Hyp)与肌苷 (U -Cr)。
- The hardness of the sintered YT15 alloy was 92 1 HRA and bending strength 1351 9MPa. 烧结后的合金硬度为92 1HRA、横向断裂强度为 135 1 9MPa
