您要查找的是不是：
- The influence mechanism of the hydrodynamic shear stress was analyzed by comparison of the morphological characteristics of activated sludge floe and the types of microorganism. 通过不同水流剪切力下活性污泥絮凝体形态及微生物类型的比较，分析了水流剪切力对活性污泥特性的影响机理。
- The influence mechanism of the hydrodynamic shear stress was analyzed by comparison of the morphological characteristics of activated sludge floc and the types of microorganism. 通过不同水流剪切力下活性污泥絮凝体形态及微生物类型的比较;分析了水流剪切力对活性污泥特性的影响机理.;结果表明:SBR系统中的活性污泥对水流剪切力的变化较敏感;
- hydrodynamics shear stress 水流剪切应力
- For liquid film flow under the effect of gas flow, the hydrodynamics and flow stabilities of liquid film are obviously influenced by the interfacial shear stress. 当气液界面有同向或反向气体掠过时，气液界面存在切应力，必然影响到液膜的水动力学特性和流动稳定性特征。
- Critical resolved shear stress (O’crss). 临界分剪切应力。
- The influence made by hydrodynamics shear force on activated sludge disposal system took place when the selection process of microorganism performed. 水流剪切应力对活性污泥处理系统沉降性能的影响是通过剪切应力对微生物的选择作用实现的。
- The interfacial shear stress is a constant proportion of the bottom shear. 交界面的剪力与底部剪力之比是常数。
- The process does not affect the shear stresses. 这样的处理并不影响剪应力。
- According to the twin shear stress theory, this paper improves on Duncan Model. 根据双剪应力理论对邓肯模型进行了修正。
- Tensile stress and shear stress are transferred by PBL shear connectors. 计算得到钠-混凝土接头的最不利荷载组合内力。
- A fluid is a substance that deforms continuously under an applied shear stress. 液体在剪应力作用下不断变形？？
- The main shear stress and its hydraulic system, calculation and research. 主要对其剪切力和液压系统进行计算和研究。
- Thus fluid shear stress has been considered one of the atherogenic factors. 在动物研究中还发现切应力与内皮细胞增生程度有关。
- With gob span increasing, equivalent shear stress in basic roof increases. 随着采空区跨度的不断增加，基本顶等效剪力不断增大。
- hydrodynamic shear stress 水流剪切力
- Draw the element for maximum shear stress and mark values of all stresses. 画出最大剪应力的单元体并标出全部应力值。
- Friction and cohesion are best defined in terms of the plot of shear stress versus normal stress given in Figure 9. 摩擦角和粘结力最好是根据图9中剪切应力和法向应力的关系曲线确定。
- Cohesion is best defined in terms of the plot of shear stress versus normal stress given in Figure 9. 粘结力最好根据图9中剪切应力和法向应力的关系曲线确定。
- The occurrence of high shear stress at the fibre end is a factor which is expected to lead to crack generation. 在纤维端部存在高切变应力视为导致产生裂缝的因素。
- Oxygen precipitates (useful for gettering) can reduce the yield strength (critical shear stress) up to fivefole. 氧沉淀(可用作吸杂)会使屈服强度(临界剪应力)降低为五分之一。
