您要查找的是不是:
- hydraulic pump discharge 液压泵泄放
- Please open the hydraulic pump cover. 把液压泵盖打开。
- Make sure pump discharge TRV in correct position. 确认泵出口管线TRV流程已通。
- CTC maximum head is suitable for pump discharge to Butanol handling facility. 用户确认泵出口去丁醇处理装置的最大扬程是合适的.
- How many hydraulic pumps or motors fitted? 装有多少液压泵或液压马达?
- hydraulic oil pump discharge line 液压油泵泄放管路
- Adopt international brand products, imported hydraulic pump,valve and motor, which raise the quality of the rig. 采用国际品牌产品,进口液压泵、多路阀、行走马达,使旋挖钻机的品质得到了保证,赢得了广大用户的信赖。
- Indicating pressure transmitters shall be used in preference over pressure gauges except for pump discharge. 带指示的压力变送器除了泵出口应优先于现场压力表被使用。
- The radial piston pump with boot slider is a kind of new type hydraulic pump, which is developed by Germany Bosch CO. 滑靴式径向柱塞变量泵是一种新型结构的液压泵,是德国Bosch公司在20世纪80年代研制成功的产品。
- Hydraulic pump is the power unit of the hydraulic puller(hudraulis press, hydraulic pipe bender, hydraulic jack). 油压泵是油压拉出器(油压机;油压弯管机;油压千斤顶)的动力装置.
- NOTE: On pump discharge, the preferred check valves are an in-line spring loaded, swing design with lever and weight or lever and spring. 注意:在泵的排泄口处,首选的止回阀是管内弹簧负载,旋启式,配置杠杆和重量或杠杆和弹簧。
- The standby rudder shutoff valve is also opened when the standby hydraulic pump is automatically turned on. 当备用液压泵自动工作时,备用方向舵截流阀也同时打开。
- On pump discharge, the preferred check valves are in-line spring loaded, swing design with lever and weight or lever and spring. 在泵出口处,首选止回阀是管内弹簧负载,配置杠杆和重量旋启式结构,或杠杆和弹簧旋启式结构。
- Hydraulic pump is the power unit of the hydraulic puller (hydraulic press, hydraulic pipe bender, hydraulic jack). 油压泵是油压拉出器(油压机、油压弯管机、油压千斤顶)的动力装置。
- Note: Preferred mounting of check valves of any manufacturer is 5 pipe diameters downstream from the pump discharge or pipe elbow. 注释:任何制造商的止回阀最好安装在泵排泄口或管道弯头下游5倍管道直径的位置。
- After the Hydraulic Pump Station stops working, make sure all the load/unload turnbuttons be on the unload positions. 在液压泵站全部停机后,应确保所有的加载/卸载旋钮处于卸载位置。
- Standard X Series skids include a hydraulic pump, electric motor, and either a single or dual K9 or QF15 housing. 标准的X系列打滑,包括液压泵,电机,无论是单或双k9或qf15过滤器。
- A 40 micron strainer filter protected laser particle monitor samples from the pump discharge and displays ISO contamination codes on the control panel. 一个40微米滤网过滤器保护激光粒子监测样本来自泵卸载和显示,ISO国际标准化组织污染的内码在控制面板。
- Adjust valve opening manually or automatically,to change the resistance force of pump discharge pipline, and make the flowrate steady as expected. 手动或者自动调节控制阀开度,改变泵输出管线的阻力,使流量稳定在期望值。
- If when the truck is moving but the power takeoff is engaged, the hydraulic pump's life will be reduced, or sometimes the crane may starts suddenly. 如果汽车行走时,取力器处于啮合位置,液压泵的使用寿命会缩短,或者由于某些原因,会使起重机突然起动。