您要查找的是不是:
- hot extrusion of powder 粉末热挤压
- Research on Warm and Hot Extrusion of Copper Valve 铜阀门温、热挤工艺研究
- Most synthetic detergents are in the form of powder or liquid. 大多数合成洗涤剂呈粉状或液态。
- Dynamic Thermal Transfer Simulation in Hot Extrusion of Bridge Shell 汽车桥壳热挤压工艺动态传热的仿真
- Suitable for extrusion of thick-wall parts. 适用于厚壁零件的挤压。
- The Simple Device Designed for Thermal Explosive Synthesis and Hot Extrusion of TiNi Alloy 热爆热挤钛镍合金的简易装置设计原理
- Extensive experience of powder color matching. 在粉末涂料配色方面经验丰富。
- Dissolve two spoons of powder in warm water. 将两匙粉末溶解于温水。
- The silver halide fibers were made by means of hot extrusion. 采用热挤压法成型制备出卤化银多晶光纤。
- There`s only half a dozen kegs of powder! 这里只有半打三十加仑桶装的火药了!
- The surface of powder core should be dealt with insulating coating. 磁粉心表面应进行绝缘涂覆处理。
- The appearance of the product submits shape of powder granular. 本产品外观呈粉粒状。根据顾客需要,可提供彩色系列产品。
- This paper calculates and analyzes the invalidation in aluminum hot extrusion dies. 摘要文章针对实际生产中铝型材热挤压模具的失效问题进行数值模拟。
- USE: The set is used for compoud extrusion of tire tread. 用于轮胎胎面的复合挤出。
- Extrusion of the channel may even be happening today. 通道的挤压甚至到今天都可能还在发生。
- The superplastic extrusion of MB26 magnesium alloy is also studied. 另外还对该合金的超塑性挤压作了实验研究。
- This paper deals with the numerical simulation analysis of hot extrusion forming process of the Hooke's Joint using three-dimensional elasto-plastic finite element method. 采用三维弹塑性有限元法对虎克式万向节热挤压成形过程进行了数值模拟分析。
- Non-silicone, wets surface of powders. 非有机硅、粉末表面湿润。
- Finally, used Finite Element Analysis Software(DEFORM) to analyze the formability of magnesium alloy under hot extrusion. 探讨不同材料之单位长度重量与相关机械性质之关系,再以有限元素分析软体DEFORM来进行挤制成形性之研究。
- After cold isotropic pressing, sintering and hot extrusion, composites with a density close to 100% of the theoretical density is obtained. 奈米碳管和铝合金经球磨步骤之后再以湿式混粉的方式可改散奈米粉末团聚现象,之后进行热挤型可得到理论密度接近100%25材料。