您要查找的是不是:
- hot dip by galvanization 热浸镀
- Drilling method of pin hole: the pin hole shall be predrilled by supplier prior to hot dip galvanization. 销钉孔的钻法:销钉孔应为供应商在热镀锌预钻好。
- Effects of cooling rate on eutectic microstructure of Zn-(0.24Ni) alloy for hot dip galvanization were investigated. 研究了冷却速度对用于热浸镀Zn的Zn0.;24Ni合金共晶组织的影响。
- The technology of hot dip aluminized coatings on ferrous products by water flux methods in studied. 研究了水溶剂法钢铁表面热浸镀铝工艺;
- The surface morphology and composition of Zn 5%Al RE coating hot dip plated on alloy steel wire was analyzed by means of metallography,SEM and EPMA. 本文采用金相显微镜、扫描电镜和能谱仪等设备分析了在Zn?5%25 Al?RE合金溶液中热浸镀中碳钢丝表面的组织形貌和成分。
- A hot dip Zn 5%Al RE coating on high carbon steel wire is tested. 试验了在高碳钢丝表面上热浸镀Zn 5%25Al RE合金层。
- The aluminized steel wire was made by hot dip process.The scanning electron microscopy (SEM), EDAX and MEF3 microscopy were used to analyze the microstructure of the coating. 用熔剂法钢丝热浸镀铝工艺制备镀铝钢丝,通过扫描电镜、能谱和MEF3显微镜对镀层形成机理和镀层的组织结构进行了分析。
- Knitting used Tinned Plated CCS Wire is made by washing over with a coating of tin or tin-lead alloy on the surface of copper coated wire by hot dip method. 编织镀锡铜包钢细线 是在铜包线表面用热镀的方法镀上一层均匀的锡或锡铅合金。
- Plasterboard and light steel keel (Bao Gang squelchs and become by galvanization) be united in wedlock, form plasterboard of light steel keel. 石膏板与轻钢龙骨(由镀锌薄钢压制而成)相结合,便构成轻钢龙骨石膏板。
- The Annealing Furnace is a key Equipment for any Hot Dip Galvanizing Line. 对于任何连续热镀锌线退火炉都是关键设备。
- High structure strengh,hot dip galvanized,greatly protract time of use. 高强度管材、产品经热镀锌处理、大大地延长了使用寿命;
- Surface quality of hot dip plating Zn-Al alloy were further improved. 采用该合金助镀剂进行Zn Al合金热浸镀的样品 ,表面质量得到进一步改善。
- Commodity:Hot dipped galvanized steel in coil . 货物名称:冷轧热镀锌卷。
- The cold rolled coils entered into hot dip galvanizing workshop are put on waiting position and then transferred to uncoiler by coil car. 冷轧卷进入热镀锌车间后置于待处理位置,然后通过上卷小车送至开卷机。
- This article has described the mechanism and application of this system, and the technological processes of hot dipping galvanization and powder coatings spray,and its cautions. 阐述了该体系的作用原理及应用。介绍了护栏热浸锌和喷涂粉末涂料的工艺流程及其注意事项。
- The effects of aluminum bath temperature, immersion time and silicon content on hot dip aluminum for HT200 are studied. 研究了热浸温度、时间及硅含量对HT200热浸渗铝的影响。
- The technique of hot dip Zn-Ni alloy coating is an effective method for solving the reactive steel problem in hot dip galvanizing. 热浸锌镍合金镀层技术是解决活性钢热镀锌问题的有效方法。
- The effect of Ni content in Zn bath on thickness of hot dip galvanized coating was studied using SEM. 应用SEM、EPMA等方法研究了锌浴中镍含量对热浸锌镀层厚度的影响,试验结果表明:当锌浴中镍含量小于0.;12%25 (wt)时,镀层随镍含量增加而减薄;
- The tensile properties and corrosion resistance of hot dip 55%Al Zn alloy coating steel are investigated. 研究了热浸镀 5 5%25Al Zn合金镀层钢的室温拉伸性能和耐蚀性能。
- By metalloscope, SEM and spectrometer, the basic technical parameters of hot dipping alumetizing were obtained. 在对渗铝钢管进行金相、SEM和能谱分析后,确定了热浸渗铝的基本工艺参数。