您要查找的是不是：
- hot deformation parameters 热变形参数
- It is seen that the deformation parameters agree rather well with each other. 人们看到形变参量彼此符合得相当好。
- The hot deformation behaviors and microstructure evolution of 6Cr21Mn10MoVNbN steel were systematically analyzed by thermomechanical compression test and hot rolling solid solution test, and the best technical parameters were obtained. 通过热模拟压缩试验和热轧固溶试验系统分析了6Cr21Mn10MoVNbN钢的热变形行为和显微组织演变规律,获得了最佳的工艺参数。
- The same LM algorithm is used to track the affine deformation parameters of the target. 使用LM优化方法跟踪目标的仿射运动参数。
- The hot deformation activation energy of KFC copper alloy during hot deformation is 288.79 kJ/mol. 其热变形激活能Q为288.;79kJ/mol;
- The hot deformation behavior of low nickle electric heating alloy was studied by means of hot simulating technology. 利用热模拟技术对铁基低镍电热合金的热变形行为进行了试验研究。
- A simulation and analysis has beencarried out by using DEFORM3D for hot deformation process of finish-form punch with different configuration. 利用DEFORM3D系统，模拟研究了不同终成形凸模结构对套管叉热成形影响的规律。
- The hot deformation activation energy Q is 469.03kJ/mol and the hot deformation equation is derived based on the experiments. 32Mn-7Cr-1Mo-0.;3N奥氏体钢的热变形激活能Q值为469
- Di-rect quenching of work piece through precooling can reduce hot deformation and improve strength and toughness of the core, It prevents ... 结果还表明，工件预冷直接淬火可以减小热处理变形，还能提高心部强韧性，防止表面局部氧化脱碳，有利于提高点接触疲劳寿命。
- During hot deformation of metal, a chain of complex changes such as grain growth and recrystallisation will happen on its microstructure. 金属在热成形过程中微观组织发生诸如晶粒长大、再结晶等一系列的复杂变化,会直接影响加工过程与产品的力学性能。
- The viscid-plastic FEM is suitable to solve the question of metal hot deformation or strengthen indistinctive soft metal deformation. 而粘塑性有限元法适用于金属热变形或强化不显著的软金属变形。
- The effect of cooling conditions on some deformation parameters in the process for biaxially oriented tubes,such as axial drawing ratio,hoop extension ratio,thickness distribution and strength,etc. 围绕双向拉伸薄壁管工艺技术中冷却条件对某些变形参数,如轴向拉伸比、环向扩张比、壁厚分布、强度等的影响进行了综合分析。
- The microstructure evolutions of Al-Si-bearing low carbon steel during multi-pass hot deformation and subsequent continuous cooling process were studied. 利用热模拟试验研究了铝硅合金化低碳钢多道次变形及连续冷却过程的组织演变。
- Based on the collected creep deformation data of CFRD built on riverbed alluvium, the back analysis for calculation parameters and creep deformation parameters of dam materials was performed. 摘要在整理分析覆盖层上面板堆石坝变形观测资料的基础上，对坝体堆石料模型计算参数及流变模型参数进行反馈分析。
- BP neural network model for the study of constitutive relationship of the BT20 titanium alloy during hot deformation is constructed by the MATLAB program. 采用MATLAB程序建立BT20钛合金高温变形时流变应力的神经网络模型,利用该模型对其他一些热力学状态下材料的流变应力进行了预测。
- It is very important to determine deformability parameters in the simulation of stability of rock masses. 摘要岩体变形参数的确定对岩体稳定性模拟至关重要。
- The effects of rolling and cooling process on microstucture and property of C-Mn steel plates treated with Al-Ti-CaSi combined addition after hot deformation on stress relieving operation have been investigated. 本文研究轧制和冷却工艺对Al-Ti-CaSi复合处理的C-Mn钢板,在热成型或消除应力处理后组织和性能的影响。
- The flow stress values decrease with increasing deformation temperature and/or decreasing strain rate,which can be represented by a Zener-Hollomon parameter in an exponent-type equation with the hot deformation activation energy Q of 236 kJ/mol. 在实验范围内;流变应力值随着应变速率减少和变形温度升高而降低;可用Zener-Hollomon参数的幂指数关系描述合金的流变应力行为;其变形激活能Q为236 kJ/mol.
- A bowl of hot chicken soup is good for you. 喝一碗热鸡汤对你有好处。
- equivalent deformation parameters 变形参数
- 今日热词
-
- 深远海浮式风电平台 - deep-sea floating wind power platform
-
- 京雄高速公路 - Beijing-Xiongan expressway
-
- 农业及相关产业增加值 - the added value of agriculture and related industries
