您要查找的是不是:
- The hot deformation behavior of low nickle electric heating alloy was studied by means of hot simulating technology. 利用热模拟技术对铁基低镍电热合金的热变形行为进行了试验研究。
- The hot deformation behaviors and microstructure evolution of 6Cr21Mn10MoVNbN steel were systematically analyzed by thermomechanical compression test and hot rolling solid solution test, and the best technical parameters were obtained. 通过热模拟压缩试验和热轧固溶试验系统分析了6Cr21Mn10MoVNbN钢的热变形行为和显微组织演变规律,获得了最佳的工艺参数。
- Hot Deformation Behavior of a New Type Spray Formed Nickel-Base Superalloy 新型喷射成形镍基高温合金热变形行为的研究
- Hot Deformation Behavior of a Non-quenched High Carbon Microalloyed Steel for Connecting Rod 一种非调质连杆用高碳微合金钢的热变形行为
- Effect of Melt-treatment on Hot Deformation Behavior of Aluminum Sheet Used for Easy-open Can 熔体处理对易拉罐用铝材热变形行为的作用研究
- Study of Grain Refinement, Hot Deformation Behavior and Working Technology of Mg-Al Alloys Mg-Al合金晶粒细化、热变形行为及加工工艺的研究
- HOT DEFORMATION BEHAVIOR AND CONSTITUTIVE RELATIONSHIP OF Ni-Ti SHAPE MEMORY ALLOY DURING COMPRESSION AT ELEVATED TEMPERATURES Ni-Ti形状记忆合金热压缩变形行为及本构关系
- Study on Hot Deformation Behaviors of 600MPa Grade C-Si-Mn TRIP Steel 600MPa级C-Si-Mn系TRIP钢高温变形行为的研究
- hot deformation behavior 热变形行为
- Relation between hot deformation behaviors of 34CrNi3Mo steel and Zener-Hollomon parameter 34CrNi3Mo钢高温变形行为与Zener-Hollomon因子的关系
- The settlement and deformation behavior of the soft clay subgrade are analyzed in detail before and after the opening to traffic. 详细分析了通车前和通车后软土路基的沉降变形特征。
- The hot deformation activation energy of KFC copper alloy during hot deformation is 288.79 kJ/mol. 其热变形激活能Q为288.;79kJ/mol;
- Using the triaxial rock mechanics testing unit manufactured by American MTS Co, rock strength and deformation behavior are studied. 采用美国MTS公司生产的三轴岩石力学试验机进行岩石强度特性和变形特性试验。
- The research proves that post tensioned prestressed concrete hollow slab own fine deformation behavior and crack resistance. 本文研究表明:后张预应力混凝土空心板具有良好的变形性能和抗裂性能。
- A simulation and analysis has beencarried out by using DEFORM3D for hot deformation process of finish-form punch with different configuration. 利用DEFORM3D系统,模拟研究了不同终成形凸模结构对套管叉热成形影响的规律。
- The densification and deformation behavior of pure aluminum by powder metallurgy during the ECAP process was studied by compressible rigid plastic FEM. 针对纯铝粉末多孔材料,采用可压缩刚塑性有限元法对其等径角挤压过程进行数值模拟,并着重分析了静水压力对挤压效果的影响。
- The hot deformation activation energy Q is 469.03kJ/mol and the hot deformation equation is derived based on the experiments. 32Mn-7Cr-1Mo-0.;3N奥氏体钢的热变形激活能Q值为469
- Abstract: Using the triaxial rock mechanics testing unit manufactured by American MTS Co, rock strength and deformation behavior are studied. 摘 要: 采用美国MTS公司生产的三轴岩石力学试验机进行岩石强度特性和变形特性试验。
- Di-rect quenching of work piece through precooling can reduce hot deformation and improve strength and toughness of the core, It prevents ... 结果还表明,工件预冷直接淬火可以减小热处理变形,还能提高心部强韧性,防止表面局部氧化脱碳,有利于提高点接触疲劳寿命。
- During hot deformation of metal, a chain of complex changes such as grain growth and recrystallisation will happen on its microstructure. 金属在热成形过程中微观组织发生诸如晶粒长大、再结晶等一系列的复杂变化,会直接影响加工过程与产品的力学性能。