您要查找的是不是：
- A hot dip Zn 5%Al RE coating on high carbon steel wire is tested. 试验了在高碳钢丝表面上热浸镀Zn 5%25Al RE合金层。
- The Annealing Furnace is a key Equipment for any Hot Dip Galvanizing Line. 对于任何连续热镀锌线退火炉都是关键设备。
- The hot dipping alumetizing technology for 20G seamless steel tube was studied. 摘要对20G无缝钢管的热浸渗铝工艺进行了研究和试验。
- High structure strengh,hot dip galvanized,greatly protract time of use. 高强度管材、产品经热镀锌处理、大大地延长了使用寿命；
- Structure: Adopting to polyester film as dielectric, iuductrive construction, epoxy resin as dip material. 结构:聚酯膜作介质,有感结构,环氧树脂包封。
- Surface quality of hot dip plating Zn-Al alloy were further improved. 采用该合金助镀剂进行Zn Al合金热浸镀的样品 ,表面质量得到进一步改善。
- By metalloscope, SEM and spectrometer, the basic technical parameters of hot dipping alumetizing were obtained. 在对渗铝钢管进行金相、SEM和能谱分析后，确定了热浸渗铝的基本工艺参数。
- The cold rolled coils entered into hot dip galvanizing workshop are put on waiting position and then transferred to uncoiler by coil car. 冷轧卷进入热镀锌车间后置于待处理位置,然后通过上卷小车送至开卷机。
- Commodity:Hot dipped galvanized steel in coil . 货物名称:冷轧热镀锌卷。
- The effects of aluminum bath temperature, immersion time and silicon content on hot dip aluminum for HT200 are studied. 研究了热浸温度、时间及硅含量对HT200热浸渗铝的影响。
- Technologies were then developed including using of zinc alloy, such as Zn-Mn, Zn-Mg and Zn-Ni alloy baths, and high temperature hot dipping process. 为此，国外发展了多种热镀锌技术，包括在锌浴中添加合金元素的多元合金、锌锰合金、锌镁合金和锌镍合金热镀锌技术及高温镀锌技术。
- Abstract: The new Technology of soluble anode electrolysing hot dipping zinc slag is analyzed. 文摘:从理论上分析了可溶阳极电解处理热镀锌废渣新工艺的可行性。
- Wear resistance of Q195 after Al hot dipping and post diffusion was studied and compared with that of carbonized Q195. 对Q195普通低碳钢分别进行热浸镀铝加共渗处理和渗碳处理,并对两种处理件进行耐磨性试验。
- Abstract: The hot dipping alumetizing technology for 20G seamless steel tube was studied. 文摘:对20G无缝钢管的热浸渗铝工艺进行了研究和试验。
- The new Technology of soluble anode electrolysing hot dipping zinc slag is analyzed. 从理论上分析了可溶阳极电解处理热镀锌废渣新工艺的可行性。
- The research status of hot dipping galvanizing for evaporative condenser coil and its mechanism were reviewed. 综述了蒸发式冷凝器盘管热浸镀锌机理及热浸镀锌的研究现状。
- The application technology of powder coatings for hot dipping galv an ized guardrail of highway is introduced. 介绍了热浸锌高速公路护栏喷塑涂装工艺方法,在工艺生产中应该注意的问题和解决方法。
- The technique of hot dip Zn-Ni alloy coating is an effective method for solving the reactive steel problem in hot dip galvanizing. 热浸锌镍合金镀层技术是解决活性钢热镀锌问题的有效方法。
- Effects of cooling rate on eutectic microstructure of Zn-(0.24Ni) alloy for hot dip galvanization were investigated. 研究了冷却速度对用于热浸镀Zn的Zn0.;24Ni合金共晶组织的影响。
- The effect of Ni content in Zn bath on thickness of hot dip galvanized coating was studied using SEM. 应用SEM、EPMA等方法研究了锌浴中镍含量对热浸锌镀层厚度的影响，试验结果表明：当锌浴中镍含量小于0.;12%25 (wt)时，镀层随镍含量增加而减薄；
