您要查找的是不是：
- high manganese cast steel 高锰铸钢
- The Heat Cracking of the High Manganese Casting Steel Affected by the Chemical Composition 化学成分对高锰钢铸件热裂缺陷的影响
- Our products: Various gray iron, ductile iron, common cast steel, low-alloy steel, high manganese steel, etc various parts of architectural and mechanical engineering. 本公司主要生产各种灰铁件、球铁件、铸钢件、高猛钢件等各种建筑、工程机械用零部件。
- Shot Peening Strengthening of Track Pans Made of Medium Manganese Cast Steel 中锰铸钢坦克履带板连接筋的喷丸强化处理
- INVESTIGATION OF DANAMIC GRINDING WEAR CHARACTERISTIC OF MID MANGANESE CAST STEEL 系列中锰铸钢的动载磨料磨损性能研究
- INVESTIGATION of In-SERVICE STRENGTHENING CHARACTERISTICS OFTANK TRACK PANS MADE OF MEDIUM MANGANESE CAST STEEL 中锰铸钢坦克履带板服役时的强化特性研究
- Through the explosive induration experiment of high manganese steel, safety and insensitive explosives was selected. 通过高锰钢的爆炸硬化实验，选出适用于爆炸硬化的安全钝感炸药。
- medium manganese cast steel 中锰铸钢
- High temperature graphitizing annealing kinetics for high manganese malleable cast iron has been investigated. 对高锰可锻铸铁的高温石墨化退火动力学进行了研究。
- Abstract: Through the explosive induration experiment of high manganese steel, safety and insensitive explosives was selected. 文摘:通过高锰钢的爆炸硬化实验，选出适用于爆炸硬化的安全钝感炸药。
- The results show that it can be used in carbon steel, high manganese steel, iron or cuprum alloys castings. 生产性试验表明,该涂料用于生产碳钢、高锰钢、铸铁及铜合金铸件均可获得令人满意的结果。
- Cast steel valve installation at an oil refinery. 安装在炼油厂的铸钢阀门。
- The robot can cast steel after being reprogrammed. 在重新设定程序之后,机器人能浇铸钢材。
- Resists high temperature fluctuations which damage cast steel valves. 抗高温波动,这种波动往往会损坏铸造阀门。
- The study of damage of low temperature brittleness on high manganese steel has been carried out by theoretical analysis and a series of impact tests. 通过理论分析和系列冲击试验,对高锰钢出现的低温脆性损坏进行了分析研究。
- Effect of polarization potential on the corrosion-wear behavior of high manganese steel in ore slurry was investigated by a self-made impact corrosive-wear tester. 通过自制的冲击腐蚀磨损试验机,施加不同极化电位对高锰钢在矿浆介质中的冲击腐蚀磨损行为进行了试验研究。
- The results have shown that under the high velocity impactig of alundum particles, high manganese steel had the typical erosion behaviors of ductile metals. 结果表明，在高速氧化铝粒子冲蚀下，高锰钢仍具有典型延性材料的冲蚀磨损特性。
- Now this problem can be solved using aluminohermic welding ,since the separation of carbide and the formmation of liquid crack ware controlled in HAZ of high manganese steel. 本文采用铝热焊方法进行焊接，发现在铝热焊条件下，高锰钢热影响区的碳化物析出与液化裂纹的产生都得以有效抑制。
- The cast steel cools after passing through several water walls. 铸钢反复经过水冷壁之后，冷却下来。
- Adopt two cast steel rods,which connect the down cutter part. 采用两个铸钢连杆，连接下节切刀部件。
