您要查找的是不是：
- hexagon socket wrench 六角套筒扳手
- Use socket wrench to remove regulator seat for replacement. 采用套筒扳手来拆卸调节阀阀座进行更换。
- hexagonal socket wrench 六角套筒扳手
- couble hexagon opening double offset box socket wrench 双头弯脖梅花扳手
- double hexagon opening double offset box socket wrench 双头弯脖梅花扳手
- Remove the screw-in elements by turning the element counterclockwise with an 1-1/2 inch socket wrench. 使用1.;5英寸的套筒扳手按反时针方向旋转拆卸加热元件上的螺丝。
- ECVV China, a b2b directory for global Hexagon Socket Countersunk Head Cap ...Get quality China Hexagon Socket Countersunk Head Cap Screws from Chinese ... 一个常见的用法是让一个埋头螺栓或螺钉头， ... 沉头螺丝按照统一螺纹标准往往有一个 ...
- Hand tools: Hex socket wrench: DIN911 “L” and “Z” and other non-standard hardware stampings. 手工具:内六角板手:DIN911和Z 字形;及其它非标的五金冲件!
- Align the bushing with the spring eye or shackle eye and tighten the nut at the socket wrench end of the threaded roTighten until the bushing is forced into the spring eye. 将衬套对准弹簧眼或U型钩眼，并在螺纹杆的套筒板手末端锁紧螺帽。锁紧直到衬套进入簧眼。
- Side view of hexagonal socket bolt with adjustable thread length. 螺纹长度可调整的六角插口螺栓的侧面图。
- Open end or socket wrench. 英寸开口末端或套筒扳手。
- Using a 9/16" socket wrench or nut driver, remove the four nuts from the #1 check studs (See fig. 1) Using two hands, place them at 12 o'clock and 6 o'clock, wiggle the check assembly free. 采用一把9/16英寸套筒扳手或螺母起子，用两手从1号止回阀柱头螺栓（参阅图1）上拆卸四个螺母，将其放置在12点和6点的位置，摆动拆卸止回阀总成。
- Hexagon socket set screws with cone point GB/T78-1985内六角锥端紧定螺钉
- Hexagon socket set screws with dog point GB/T79-1985内六角圆柱端紧定螺钉
- Hexagon socket Button head screws 圆头内六角螺钉
- Hexagon socket head cap screws with hole, low 薄型带孔内六角圆柱头螺钉
- Hexagon socket head cap screws with, reduced head 薄型内六角圆柱头螺钉
- We can reverse this pattern using specially generated adapter molecules made of antibodies that snap onto the arms of the virus like sockets on a socket wrench. 我们可以将抗体制成转接分子，接在病毒的手臂上，就像套筒扳手的套筒一样，来扭转这种情况。
- Hexagon socket headless set screws 六角凹头定位螺丝
- Hexagon socket set screws with flat point 内六角平端紧定螺钉
