您要查找的是不是：
- heating tube support 炉管支承架
- seat for heating tube support 炉管支承架底座
- Diangong Heat tube Vacuum tube heat collector. 电工太阳能热管真空管集热器.
- The heat preservation of the oven and heat tube network system. 炉窑、热力管网系统的保温;
- Adopted far infrared metal heating tube, fast heating and energy saving. 采用远红外线金属电热管加热、热风循环，加热速度快、温度均匀、省电。
- Material, surface and structure design of heating tube imported enable water scale fall off automatically at felicity conditions which prolong service life of heater much. 吉之美采用英国进口加热管，其材质选择及表面与结构设计可使加热管上的水垢在适当条件下自动脱落。
- SWH style heat cylinder is crooked, avoid the material fall into and cause the heat tube burm down. SWH型发热管弯型设计,避免因原料落入筒内而引起发热管损坏。
- The preferred method is by oxy-acetylene flame. Heat tube first, beginning one inch from edge of valve. 建议采用乙炔火焰对连接部件进行加热。首先从离阀门1英寸的地方开始对管道进行加热
- TSH style heat cylinder is crooked &def avoid the material fall into and cause the heat tube burm down. TSH型发热管弯型设计，避免因原料落入筒内而引起发热管损坏。
- SWH style heat cylinder is crooked,avoid the material fall into and cause the heat tube burm down. SWH型发热管弯型设计，避免因原料落入筒内而引起发热管损坏。
- TSH style heat cylinder is crooked , avoid the material fall into and cause the heat tube burm down. TSH型发热管弯型设计，避免因原料落入筒内而引起发热管损坏。
- TSH style heat cylinder is crooked , avoid the material fall intocause the heat tube burm down. TSH型发热管弯型设计，避免因原料落入筒内而引起发热管损坏。
- In order to analyze the formation mechanism of sodium chloride aerosol,it is indispensable that the temperature filed in heating tube was researched. 为了分析钠盐气溶胶的形成机理,有必要对加热圆管内的温度场进行研究。
- HRE clamps are designed as hose and tube supports for high cyclic pressure applications. 人权教育夹具设计的软管和高循环压力管的应用支持。
- The technical core and performance feature of inorganic heat tube,and its application on air preheater of atmospheric furnace were recommended briefly. 简要介绍了无机热管技术的核心和性能特点以及在常压炉空气预热器上的应用情况。
- Designing Factors in Tube Support System 系统管架设计要素浅析
- The heating process of steel wire during austenization in continuous heating tube furnace has been simulated and the results have been proved through metallurgical analysis. 对使用管式连续热处理炉进行钢丝奥氏体化热处理过程中的钢丝实际加热过程进行了模拟计算,并通过金相分析验证了模拟结果。
- After the air preheater system of hydrogenated reaction furnace changes into heat tube preheater,the heat efficiency of furnace increases about 3%. 加氢反应炉空气预热系统改用热管预热器后,炉子热效率提高了约3%25。
- image intensifier tube support unit 影像增强器立柱
- The electrical heating tube is made of U shaped steel tube, sintered magnesia and heating wire. It is immersed directly in the water for preventing heat loss. 电热管用U型钢管，烧结氧化镁和电热丝制成，直接浸在水里热能损耗少。
