您要查找的是不是:
- heat transfer flow rate 传热速率
- Effects of the liquid property,flow rate,material and surface characteristic,temperature and boiling on the fouling of heat transfer equipment are analyzed. 分析了换热设备结垢的主要影响因素:流体性质、流体流速、材质及表面状况、温度和沸腾等。
- A mathematical model for heat transfer process in HPH furnace was established and verified,then applied to analysis of the relationship between gas flow rate and annealing time. 通过建立全氢罩式退火炉炉内传热过程的数学模型,并经过实测验证后,分析了循环风量与退火时间的关系。
- A new flat strip-insert with elliptical teeth and notches was developed to solve the problem of rapid fouling growth and reduced heat transfer coefficient at a low flow rate in heat transfer tubes. 摘要 针对较低流速下传热管内容易生长污垢和低传热系数问题,本文提出一种具有旋流口椭圆齿的新型平带。
- Thermal conductivities of each layer were estimated from the cooling experiments conducted at very high flow rate of cooling water to eliminate effects of the surface heat transfer coefficient. 模式中各层的热传导系数以高速水流冷却的玉米穗之实验数据推估,因此时表面热传递系数的影响可以忽略。
- Reynolds Stress Model (RSM) and FLUENT software were used to simulate the shell-pass flow and heat transfer properties of regular helical baffles heat exchangers under different flow rates. 利用FLUENT软件,采用雷诺应力湍流模型模拟了不同流量下常规螺旋折流板换热器壳程的流动与传热性能,并用实验验证了模拟的可靠性。
- Effects of Liquid Flow Rate and Surface-to-nozzle Distance on Non-boiling Heat Transfer Performance in Spray Cooling 无沸腾喷雾冷却中流量和喷头高度对换热性能的影响
- NUMERICAL STUDY ON TURBULENT CONVECTION HEAT TRANSFER AND HYDRODYNAMICAL PROCESSES IN A TUBE WITH VARIABLE PROPERTIES AND INCREASING FLOW RATE 变物性条件下管内加速流时湍流换热与流动过程的数值模拟
- Numerical Simulation Study on Turbulent Convection Heat Transfer in a Tube with Variable Properties and Decreasing Flow Rate 管内变物性流体减速时对流换热实验结果的数值模拟
- Compare of plug nozzle's heat transfer characteristics in different opertoin condition and with different coolant flow rate 不同压比下冷却剂流量对塞锥再生冷却换热的影响
- Consistent flow rate from nebulizer to nebulizer. 在雾化器间提供持续稳定的流通速率。
- Chengyi Heat Transfer Equipment Co., Ltd. 东莞诚艺热转印设备有限公司。
- Affect the melt flow rate and the cooling speed. 会影响熔体的流动性和冷却速度。
- Average surface heat transfer coef. 平均换热系数
- Possibility to control the flow rate by Pump. 由蠕动泵调节盐溶流量。
- We shall heat the container by heat transfer. 我们要用热传导的方式给这个容器加热。
- Typical maximum system flow rate (7.5 feet/sec. 标准最大系统流量为7.;5英尺/秒。
- Laser heat transfer printing has many applications. 激光热转印技术正在被广泛使用。
- The HTA flow rate has two-faced influences on them. 热风流量对其影响呈现两面性。
- Heat transfer and shielding tests will be completed in 1976. 于1976年将完成传热和各项屏蔽试验。