您要查找的是不是:
- Type O steel shall be supplied without specific grain size control. 0类型的钢没有特殊的颗粒尺寸控制。
- grain size control 晶粒粒度控制,粒度控制
- There is a general decrease in grain size upward. 粒度一般是向上递减的。
- Rough and loose structure for rough grain size. 接触面积大时用粗松的组织。
- Fine grain size for the smaller contact area. 接触面积小时用细的粒度。
- Coarse grain size for the larger contact area. 接触面积大时用粗的粒度。
- Grain size of the sample had been measured. 降尘量和粒度参数值在尘暴前期和后期都呈现不同特征。
- The grain size distribution was bimodal as a whole. 尘暴降尘的粒度基本呈双峰态分布。
- Its equidimensional grain size tends to mask the laminae. 它的粒度的均一往往会掩盖了纹层层理。
- Grain size had some effect on the rate of crack propagation. 晶粒尺寸大小对裂纹扩展速率也有影响。
- Does the supplier have an established Sand Control procedure to control molding and core sand mixes? Especially for grain size and sand moisture. 工厂是否制定了型砂的控制程序来控制造型和制芯的混砂过程?尤其是砂的粒度和含水量?
- From the aspects of grain size, impurity shape and size, structure type and so on,the control or influence factors of pipeline toughness are discussed. 本文从晶粒尺寸、夹杂物形态和大小以及组织结构类型等几个方面论述了管线钢韧性的控制或影响因素。
- Fine-grain (grain size <0.5 mm) aluminosilicate concrete. 细颗粒(粒度小于0.;5毫米)的硅铝酸盐混凝土。
- The best rubbing time and grain size are given in the paper. 文中给出了最佳的样品研磨时间及粒度。
- So it was concluded that lower heat input and suitable preheated temperature should be adopted to control grain size and microstructure morphology. 因此为提高焊接粗晶区的韧性,应采用小线能量和合适的预热温度来控制晶粒尺寸和组织形态。
- Align or size controls based on the location and size of a single control. 基于单个控件的位置和大小对控件或调整控件的大小。
- The relationship be-tween grain size and fractal dimension is investigated. 考察了晶粒度与分维之间的关系。
- Zip- The change computer screen size controls zip, Visual Basic. 改变计算机屏幕大小的控件。
- Considering the different of PTA grain size,using different process control emphasis and depressurize operation,the problem of high DEG content was solved. 针对PTA粒度不同 ,采用不同工艺控制重点及降压操作解决二甘醇 (DEG)含量偏高等问题。
- They impinge on the final structure, grain size and properties of this alloy. 他们对最终组织、晶粒尺寸和合金性能都有较大的影响。