您要查找的是不是：
- grain flow lines 晶粒流线
- grain flow line 晶粒流线
- Figure 1: Continuous flow lines in highly stressed crotch area. 图1：高应力弯钩区域的连续流径线。
- Seam runs must be checked for flowing lines. 必须检查线缝,确保线条流畅。
- Currently the biosensor is a 25-millimeter-square plastic chip that has a meandering flow line running through it. 目前，这种生物探测仪是一个大小为25平方毫米的塑料芯片，有一个弯曲的流水线从中穿过。
- Good venting of the cavity avoids corrosion caused by locked in gases at weld flow lines (Diesel-effect). 模具排气良好，会防止空气锁在模腔，引发烧焦导致磨损（内燃效应，如烤焦状）。
- Metal, glass, cool gray material, flowing lines, simple Qingling. 金属、玻璃，酷灰的材料，线条流畅，轻灵简约。
- In general, mold surface temperature lower than 82 C (180 F) may produce a hazy surface or a surface with flow lines, pits and other include defects. 大体上，形成表面的温度比82个C(180F)低可能用流程线生产一个朦胧的表面或者一个表面,坑和其他包括缺点。
- A flowchart symbol that represents a break in a flow line and that indicates where the flow line is continued. 表示流线断开的一种流程图的符号,并且说明断开的流线在何处继续下去。
- The flow line simulator has been used widely in the infill drilling and adjustment research. 流线模拟器已广泛应用于油田规模的加密钻井和调整研究。
- Online monitoring technology for grain flow(end) 谷物流量在线监测技术(续完)
- The flow line function and the flow function for extrusion were obtained from the construction of velocity discontinuity lines(VDL). 由构造速度间断线模型入手，建立正挤压的流线方程，以便求得是流函数。
- Surfaces:free of optically disturbing scratches,dirt,colour flaws,defects on galvanization,sink marks,deformation,flow lines,dullness,etc. 表面镀锌，标识字体凹进，不得有明显的刮痕，污垢，变形，流线，钝角和色泽瑕疵。
- continuous grain flow crankshaft 全纤维曲轴
- continuous grain flow crank shaft 连续晶体流锻造曲轴
- There are excellent production equipments in our company including full set of total package flow line and injection moulding machine. 公司设备精良,拥有全套的总装流水线和注塑机器。
- With the development of automatized and flow line welding production,high requirement on quality control and management has been put forward. 焊接生产规模不断向自动化和流水线方式发展,对生产管理水平提出了更高的要求。
- The grain crop has gone down this year. 今年的粮食作物产量下降了。
- Based on the research of former, a general integrating lot sizing and scheduling problem(GLSP) for a capacitated flexible flow line is formulated. 在总结前人研究的基础上，建立了多级多资源的柔性生产线的分批与调度 集成模型（ GLSP）。
- The strobe at the bottom of the machine will open in tedding and grains flow out to the ground by gravitation and be spread equally while the machine is advancing. 摊晒作业本面是在行走过程中打开粮仓底部闸门，粮食靠自重流到场地形成均匀铺条。
