您要查找的是不是：
- graft polymer latex [化] 接枝聚合物胶乳
- Using seeded emulsion polymerization, the high solid content, medium viscosity and stable polymer latex were prepared. 采用种子乳液聚合法,制备高固含量、中等粘度、稳定性好的聚合物乳液。
- It has been found that there were two agglomerating peaks as increasing the amount of agglomerating polymer latex(B). 本文发现,随着附聚胶乳用量的增大,存在两个附聚峰。
- Polyacry lamide and polyacrylic salt graft polymer had stronger resistance to fertilizers than starch graft polymer. 聚丙烯酰胺型和聚丙烯酸盐型的高吸水性树脂在肥料溶液中的稳定性较淀粉接枝型要强。
- The effect of polypropylene fibre and polymer latex on dry-shrinkage performance of sanded cement grout is researched. 考察了聚丙烯纤维和聚合物乳液掺加量对水泥砂浆干缩性能的影响。
- St BA MAA composite polymer latex was prepared by using three different feed methods and two different feed sequences. 用3种不同的加料方法和两种不同的加料顺序,制备了苯乙烯-丙烯酸丁酯-甲基丙烯酸聚合物复合乳液。
- Admixtures such as water-reducing admixture, silica fume and polymer latex improve properties of PPC. 减水剂、硅灰及聚合物乳液等外加剂可改善多孔透水混凝土的性能；
- Because of surface modification of graft polymer, balance adsorbance of surfactant on carbon black surface and zeta electric potential are changed. 与普通炭黑比较，表面活性剂在改性炭黑表面的平衡吸附值发生较大的变化，从而使该类粒子的表面zeta电位值发生变化。
- Monomers were fed in different manners to prepare 5 PAN/PBA composite polymer latex with various properties. 用3种不同加入单体的方法和2种不同加入顺序，制备了PAN／PBA复合聚合物乳胶。
- A new type of precrosslinked gel profile control agent based on starch-aerylamide graft polymer was synthesized, which simplified the process and reduced the production cost. 采用一次投料法合成用作预交联凝胶调剖剂的淀粉-丙烯酰胺接枝共聚物,简化了生产工艺,降低了生产成本;
- The results show that montmorillonite is dispersed in the matrix of polymer latex in the states of intercalation, exfoliation and aggregation. 结果表明，高分子乳液／蒙脱土杂化物中蒙脱土的分散主要以插层型、剥离型和聚集体的形式存在。
- Company of Ha Si of door of Beijing east collect is Beijing orientalize factory and American Luo Men the produces polymer latex business of joint-stock initiate of Ha Si company. 北京东方罗门哈斯公司是北京东方化工厂与美国罗门哈斯公司合资兴办的生产聚合物乳液的企业。
- Grafting Polymer Brushes from Surface of PET Film by SI-ATRP. 通过表面引发原子转移自由基聚合从聚酯薄膜表面接枝聚合物刷。
- The method, mechanism and technology of the grafting of PP are described briefly, and the application of the graft polymer of PP is introduced. 对聚丙烯接枝的方法、机理以及其接枝技术进展做了简要的介绍;并介绍了聚丙烯接枝产物的应用情况。
- The grafting methods for PP are reviewed, including the selection of monomers and initiators, and the characterization of graft polymer. 摘要对聚丙烯接枝的几种方法、单体和引发剂的选择及接枝物的表征作了简要的介绍；
- In the grafting reaction,the high graft yield is gained when POE is the grafting polymer,by using its structural properties such as higher branched degree and bigger side-chain. 将POE作为接枝机体树脂,利用其支化度比较高、容易形成接枝点来获得较高的接枝率;
- This paper introduces the synthesize of the graft polymer surfactants.Which can be gotten by the Grafting from method,the Grafting o nto method and the macromonomer meth od. 介绍了接枝型高分子表面活性剂的三种制备方法,即大分子单体法、偶合法、活性中心法。
- polymer latex particles morphology 聚合物乳胶粒形态
- The Synthesize of the Graft Polymer Surfactants 接枝型高分子表面活性剂的制备
- polyorganosilicate graft polymer 聚有机硅酸盐接枝聚合物
