您要查找的是不是：
- The simplest discharge to produce is the glow discharge. 最简单的放电产生方法是辉光放电。
- The analyzed results indicate that it is abnormal glow discharge. 分析表明,放电处于异常辉光区。
- Keywords ion carburizing;glow discharge; 离子渗碳;辉光放电;
- HEAVY PARTICLE TRANSPORT PROCESS IN CATHODE SHEATH OF NITROGEN GLOW DISCHARGE? 氮气辉光放电阴极鞘层重粒子输运过程研究?
- This paper introduces the arc added glow discharge ion titanizing technique. 采用双层辉光离子渗金属技术对纯铜进行了渗钛处理。
- Atmospheric glow discharge in air is produced difficultly due to that the discharge is transited easily to spark discharge. 摘要空气中的大气压辉光放电通常因放电易过渡到火花状态而难以产生。
- Electric discharge characterized by a cathode fall that is small compared with that in a glow discharge. 与辉光放电相比,阴极位降相对较低的放电形式。
- The samples were deposited on c-Si substrates by glow discharge inH_2 and SiCl_4 mixture. 样品是在H_2和SiCl_4混合气体中用辉光放电方法淀积在晶体硅(c-Si)衬底上的.
- DLC and a-SiC:H films were prepared by the rf glow discharge and the reactive sputtering method respectively. 本文分别采用射频(13.;56MHz)等离子体CVD及射频反应溅射方法制得了DLC及a-SiC：H薄膜。
- Pai S T. Analytic approach to glow discharge theory: the physical model [J]. J.Appl.Phys. , 1992, 71(12): 5820. 郭小明;周庭东;白秀庭.;辉光放电等离子体理论模型的建立[J]
- The crystal growth by glow discharge sputterings and ion beam sputterings and thecrystal epitaxy are introduced. 介绍了气相中晶体生长的方法,如辉光放电溅射法和离子束溅射沉积法以及晶体外延生长的方法。
- A carbon arc set-up and a modified glow discharge apparatus for the preparation of carbon stripper foils are described. 采用辉光放电裂解乙烯法和碳弧法，为串列加速器制备了长寿命碳剥离膜。
- The basic principle of glow discharge mass spectrometry (GDMS) was briefly introduced. 摘要简单介绍了辉光放电质谱(GDMS)的基本原理。
- Because of the occurrence of glow discharge, a cathode sheath is formed near the s... 最后,分析和讨论了离子的轰击对准直碳纳米管生长的影响。
- A new diffusion brazing technique with double glow discharge titanizing wasapplied to Cu/Cu brazing. 试验纯铜双层辉光离子渗镀钛扩散钎焊的新方法。
- Microhollow cathode discharge (MHCD) is a novel, nonequilibrium, high-pressure, direct current glow discharge. 微空心阴极放电是一种新颖的、非平衡、高气压辉光放电。
- The numerical simulation of CO2 reforming with CH4 to synthesis gas was carried out under the condition of atmospheric abnormal glow discharge. 对大气压反常辉光放电条件下CH4-CO2重整制合成气反应过程进行了数值模拟。
- In glow discharge,Polycarbonate (PC) membrane is modified bydepositing plasma polymer of C_2H_2/CO_2/H_2 onto PC membrane surface. 利用辉光放电技术,将C_2H_2/CO_2/H_2的等离子体聚合物沉积处理聚碳酸酯膜表面进行改性。
- With this system,we have successfully detected in situ the N + and N + 2 species in cathode sheath region of abnormal glow discharge of nitrogen. 利用该装置 ,已成功地实现了对活性离子物种N+ 和N+ 2 的“原位”检测
- The principle,discharge mode and alloying process of double glow discharge plasma surface alloying process were introduced particularly. 详细介绍了双层辉光离子渗金属技术的基本原理、放电模式及渗金属过程。
