您要查找的是不是：
- glass backing plate 玻璃衬板
- Why the new rotary backing plate? 为什么说它是新的旋转底盘?
- Then one nun took glass back kitchen. 修女拿着杯子去厨房。
- Rough surface in front and back plate. 前面与后面支承板表面粗糙。
- Damaged back plate across the width. 后固定盖板在宽度方向上破损。
- Wider back plate to cylinder settings. 后罩板到锡林的隔距宽。
- Variation in setting between back plate and cylinder. 后固定盖板和锡林隔距差异大。
- All you could see in this dark glass back then was a baby face, its two eyes shining with a puerile light. 那时你在这块灰蒙蒙的玻璃里只看见一张娃娃脸，看见一双幼稚明亮的闪闪的眼睛。
- KERSH puts his glasses back on and returns to his papers. （克什把眼镜又带上继续处理它的文档。）
- All wire burned sections are to be mounted in hardened tool steel with hardened backing plate. 所有的线割入子必须安装在热处理的模板上并有热处理后的支撑板。
- Switch on the LP-gas and ignite the lantern. Run it in full effect for about 30 seconds. Put the glass back in position. The lantern is now ready for use. 此时打开气罐,点燃气灯。将开关调到最大停顿约30秒。此时,可将气灯玻璃外罩盖上,至此,您可以安全使用此气灯。
- What this means is the auger, (the threaded part to which the backing plate attaches), is driven directly off the electric motor. 它是一个螺丝钻（背面有图案装饰的）可直接切断电源。
- The masters of Venetian crystal glass mixed the old technologies with unprecedentedly many colors, making the Venerian crystal glass back to leading the international market. 直到十九世纪中,水晶玻璃技师不断融合旧有技术并运用空前丰富的色彩后,才又将威尼斯水晶玻璃品引领到国际市场。
- The new "Easy Buff" Rotary Backing Plate is technology borrowed from our OEM Polishing System used at the car factories. 新的旋转底盘是借助于OEM抛光系统在汽车制造厂使用的技术。
- An early type of photograph made by imaging a negative on glass backed by a dark surface. 玻璃干版照相把底片放在有黑色背面的玻璃板上成像的早期照片
- The backing plate shall be welded with matching electrodes so that the weld on the clad side is flush with the backing plate surface. 底板用配套焊条焊接，使复层侧的焊缝与背衬板表面齐平。
- As an alternative to a hard backing plate, this cushioned backing plate distributes pressure for smoother buffing and minimizing swirls. 作为可更换的硬底盘，这款缓和底盘冲击的底盘可以在进行平滑抛光和减到最小程度螺旋纹时减少压力。
- The gauze disc (6) serves to hold the coiled wick tightly against the fuel charge, while the back plate (10) protects the washer. 纱网盘(6)用于保持导火索盘紧靠燃料块，后盘(10)用于保护垫圈。
- Have a glass of beer to rinse your dinner down. 喝杯啤酒把你吃的晚饭冲下去。
- Hardened backing plates are required under all pads that bottom out. 最底下的那块垫板后应该加一块热处理背板。
