您要查找的是不是:
- Material Erosion of Transition Region in Circulating Fluidized Bed. 循环流化床转折区磨损实验研究。
- The inverse cascade motion model of glass transition has been suggested. 提出了玻璃化转变的反串级涡旋运动模式。
- At transition region,the sea ice bending strength reached the maximum value. 海冰的弯曲强度随着应力速率的增加,经过延性、过渡和脆性三个阶段,在过渡区,海冰的弯曲强度达到最大值。
- The glass transition of food is one key to control food quality and stability. 食品的玻璃化转变是影响食品品质和稳定性的关键因素。
- A degree-based transition region extraction method (D-TREM) was proposed. 摘要提出一种基于度信息的图像过渡区提取与分割算法。
- The crystalline pattern of Chestnut starch was C and the glass transition temperature was 147.7C. 板栗淀粉的晶型属于C型,板栗淀粉的玻璃化转变温度为147.;7℃。
- The glass transition temperature(Tg) of HBPS-1, HBPS-2 and HBPS-3 were studied by DSC. 示差扫描量热法(DSC)的分析结果表明:HBPS-1、HBPS-2、HBPS-3的玻璃化转变温度按顺序降低,且均低于线形聚苯乙烯的玻璃化转变温度;
- The glass transition temperature of the WPC does not change after about 1000 hours under high temperature. 木塑材料在经历了近1000小时的高温老化后,其玻璃化温度几乎不变。
- The surface in the transition region between p-type and n-type semiconductor material at which the donor and acceptor concentration are equal. 在p型和n型半导体材料之间渡越区中的一个面,在这里施主杂质和受主杂质的浓度相等。
- The influence of emulsion particle size and glass transition temperature, etc on film performances is discussed. 讨论了丙烯酸酯乳液的粒径大小、玻璃化转变温度等对涂膜性能的影响。
- A three-dimensional transition region exists between the bulk adhesive and the adherend,and this region is referred as the "interphase". 在胶粘剂基体和被粘材料之间存在着一个三维转变相区,这一相区被称为界相。
- The glass transition temperature and the thermal decomposition of PDLLA were determined by DSC and TGA. 用DSC,TGA分析了不同分子量PDLLA的玻璃化转变和热失重。
- In the transition region, the structure of DMSO layer transforms from one to two layers, and the total potential of the system shows a sudden jump. 结果表明:随着插层量的升高,体系会经历三个状态,在过渡状态区,DMSO分子从一层转变为二层,体系的位能有一个突然升高的过程。
- The effects of chain flexibility and tacticity on the glass transition of PP have also been investigated. 并分析了聚丙烯主链柔顺性和立构规整度对高分子玻璃化转变的影响。
- Therefore, the transition region forms between a circular angle area &straight side area, where the flow resistance is of maximum. 于是,在板坯的凸缘面上,在圆角区域与直边区域之间,形成了一个流动阻力为极大的过渡区域。
- The addition of a plasticizer may lower the melt viscosity, elastic modulus, and glass transition temperature (Tg) of a plastic. 同时,加入增塑剂,还可以降低塑料在熔融态时的粘度、弹性模数及玻璃转变温度(tg)。
- It is also evident, from Area light and its shadow. than that this transition region is smaller next to the shadow casting object and grow larger far away from it. 我们也能很清楚地看到这个过渡区域在靠近阴影投射物体物体时较短,远离时较长。
- DMTA and DTA-TG analyses show that the glass transition temperature and heat resistance are considerably greater than those of EPU. DMTA ;DTA TG分析结果表明玻璃化转变温度和耐热性能均有所提高 .
- Then a new method to calculate the warping torsion rigidity and distribution of stress by using transition region is presented and numerically simulated. 通过理论值、数值解以及实验值之间的比较,验证了该计算方法的合理性和计算结果的精度,得知完全满足工程实际的精度要求。
- The glass transition of dehydrated rice embryo was analyzed by studying the rice seeds (Zhongzu 1) within different developing periods after 14 DAP. 以水稻品种中组1号为材料,对14DAP后不同发育时期的水稻种子脱水后种胚的玻璃化转变行为作了分析。