您要查找的是不是：
- Keywords Amidated low ester citrus pectin;Amidation;Acid-ispropanol precipitation;Viscosity;Gel breaking strength; 酰胺化低酯果胶;酰胺化反应;酸醇沉淀技术;粘度;凝胶破碎强度;
- gel breaking strength 凝胶破碎强度
- Used for measure breaking strength, elong rate of all kinds of fibre materials. 用于测定各种材料的机织物、非机织物的断裂强力、断裂伸长率。
- Used for measure breaking strength,elong rate of all kinds of fibre materials. 用于测定各种材料的机织、物非机织物的断裂伸长率。
- Breaking Strength The amount of force needed to break a wire or fiber. 断裂强度将电线或电缆折断所需施加的压力。
- Bacterial enzymes are also preferred for the desirable end product qualities of porosity and breaking strength. 细菌性酶也适于生产多孔性及易碎的产品。
- Super capsule gel breaking technology is an additive technology that breaks the gel in the frac-fluid in very short time by using capsule gel breakers. 胶囊过破胶技术是应用胶囊破胶剂使压裂液短时间内迅速破胶的添加剂技术。该技术所应用的胶囊产品是压裂措施中的新型添加剂,国内该类产品的制备工艺有锅包法、流化法等。
- Breaking strength: The quality of paper by specifying its breaking length in metre. 裂断强度:以纸张的裂断长(米)来表达纸张品质。
- The breaking strength and elongation decreased as the degree of oxidation of cotton fiber increased. 氧化棉纤维的断裂强度和断裂伸长率随氧化程度的提高不断降低。
- The breaking strength and elongation decreased as the degree of oxidation of cotton fiber i... 氧化棉纤维的断裂强度和断裂伸长率随氧化程度的提高不断降低。
- Choosing raw materials, spunlaced process properly may improve product cross breaking strength effectually. 选择适当的原料、水刺工艺参数可有效地改善产品的横向断裂强力。
- The writer explained that cross lapping and impregnated method may improve product cross breaking strength. 说明了采用交叉铺网、浸胶的方法可大大提高产品的横向断裂强力;
- In this paper,the methods are discussed on improvement breaking strength of synthetic libers in processing stage. 根据合成纤维生产工艺过程,分析了合成纤维断裂强度提高的途径。
- The breaking strength of cotton fabric will drop evidently both in warp and weft after anti crease finishing. 全棉织物经免烫整理后,其经纬向断裂强力明显下降。
- There are changes in mechanical properties of the fabric such as weight, thickness, stiffness, permeability, or breaking strength and elongation. 有织物机械性能的改变，诸如重量，厚度，硬度，透气，断裂强力和伸长度等性能的改变。
- Pills formed from synthetic fibers of high breaking strength remain on the surface because they are too strong and tough to be abraded away. 由高强度的合成纤维生成的纤维球会一直粘附在织物的表面,这是因为纤维的强度过高以至于不会因摩擦而掉落。
- The melting point of the fiber was decreased and the breaking strength and birefraction were decreased to a minimum first- ly and then incr. 随着拉伸温度的提高,纤维的熔点降低,断裂强度和双折射率则先降低后升高,出现最低值。
- Model YG 026T Electronic Table Fabric Strength Tester is used for testing the breaking strength and breaking elongation. 用于测试各种纺织品、人造革，拉链，塑料制品及钨（钼）丝的断裂强度，断裂伸长及剥离强度等数据。
- Super Gel Breaking Technology with Medium Temperature Capsule 中温胶囊过破胶技术
- The boy got a good beating for breaking the window. 那男孩因打碎窗玻璃而被狠狠打了一顿。
