您要查找的是不是：
- gear teeth ga(u)ge 量齿微分尺
- vernier gear tooth ga(u)ge 游标齿厚规
- gear tooth ga(u)ge 轮齿规
- To cause(gear teeth) to become engaged. 使（齿轮）相啮合
- Spray or paint grease onto the gear teeth. 将油酯喷或涂到齿轮齿条上。
- Exact modeling of gear teeth is based on meshing theory. 摘要根据齿轮啮合原理，建立了轮齿的精确齿形。
- Check ring gear and pinion gear teeth contact pattern. 检查环形齿轮齿接触印痕。
- Gear teeth in mesh. 相互啮合的齿轮
- The engagement of gear teeth. 啮合齿轮的互相咬合
- The distance between two corresponding points on adjacent screw threads or gear teeth. 螺距两个相对应的点或相邻的螺钉之间的距离
- If possible ,use the same lubricant for the raceway system and the gear teeth as used for initial operation. 如可能，使用与第一次润滑相同的润滑剂来润滑轴承座圈和齿轮齿条。
- The test of Pb samples indicates that the die set works smoothly and gear teeth are filled fully. 根据铅试样模拟实验表明,模具装置工作顺畅,齿轮成形饱满。
- It should be said GALLUS machine meshing gear teeth, there was a small staves of opportunities. 不该说GALLUS的机械是歪齿轮啮合的，呈现齿杠的时机小。
- The gear teeth and meshing line are distorted in the meshing process as a result of wearing and rise in temperature. 实际应用中，由于磨损和受热等原因，使得齿轮齿廓以及啮合过程中啮合线都发生了畸变。
- Milling can produce flat or angled surfaces, groves, slots, gear teeth, and other profiles, depending on the shape of the cutters being used. 铣削可根据所用的铣刀形状分别加工平面或斜面、槽口、缝、齿轮齿及其它型面。
- Longer life and lower noise could be acquired by CBN wheel grinding on HRH gear teeth for removing the distortion in the heat treatment. 在HRH齿轮齿上进行的CBN研麿消除了热处理过程中的变形，使齿轮具有较长的使用寿命和较低的噪音性能。
- The gear tooth micrometers can be used to measure the gear tooth.They are a universal measuring tool. 公法线千分尺用于测量齿轮公法线长度，是一种通用的齿轮测量工具。
- This paper assumes that the gear teeth are semi-inf inite bodys and the fl-aw or defect lying on or under the gear face is elliptically shaped. 本文假定轮齿为半无限体,裂纹(或缺陷)为椭圆形,位于齿面或齿表层下。
- By strengthening under low amplitude loading,bend fatigue strength and life of gear teeth can be increased by 3.97 and 109 percents,respectively. 经过低幅载荷强化;该齿轮轮齿的弯曲疲劳强度提高了3.;97%25;弯曲疲劳寿命提高了109%25。
- Following the rules of machining and outspread principle of involutes,the mathematical model of spur gear teeth profile is built. 根据齿轮加工原理及渐开线展开原理,建立了直齿轮齿廓的数学模型。
