您要查找的是不是:
- Galvanic current method for measuring electrodeposition velocity of immersion silver plating for printed circuit board 一种新的印刷电路板浸银镀速的测定方法
- galvanic current method 电偶电流测试法
- Defines a single parameter in the current method. 在当前方法内定义一个参数。
- Gets the root lexical scope for the current method. 获取当前方法的根词法范围。
- The current method is not generic. 当前方法不是泛型。
- In this paper,the tests of thermoelectric effect of electrodes,parasitic galvanic current and TSC have been done. 通过对TSC电极系统的热电效应测试和聚酰亚胺的寄生电流、TSC测试,分析了寄生电流产生的机理及特性,探讨了寄生电流对TSC测试的影响。
- Our current methods of production are too expensive. 我们现今用的生产方法太花钱了。
- An equation to describe the parasitic galvanic current in experimental TSDC is proposed. 提出了可描述TSDC中寄生电流的方程。
- Defines a group of sequence points within the current method. 在当前方法内定义一组序列点。
- FEM is the main method of the current method in bellow designing. 如何设计出结构合理的波纹管以保证降噪效果具有一定的理论和实际意义。
- The contrast of galvanic current determined by ACM to corrosion rate of A3 steel showed that it was practicable to monitor corrosion of rain with ACM. ACM测量的电偶电流随雨水pH值的变化与失重法测量的A3钢的腐蚀速率随雨水pH值变化的结果对比表明,利用ACM监测降雨对A3钢的腐蚀性是可行的。
- Galvanic Input/Output: Galvanic current which helps to permeate the layers of the skin much more intensively and deeply than with manual application. 液晶显示 超声波:加快新陈代谢、平衡皮肤电势、促进皮肤吸收。电流输入/输出:相比手工操作,直流有助于更集中地渗入到更深的皮肤层。
- Thermally stimulated current (TSC) is used to obtain the parameters of dielectrics,but the parasitic galvanic current existing in test influences the consequence. 热刺激电流测试(TSC)中寄生电流的存在对测试结果会产生一定的影响。
- The effects of the above mentioned surface treatments on the value of galvanic current and the variation of galvanic current with time was studied by galvanic corrosion testing. 采用电偶实验方法研究了上述表面处理方法对电偶电流大小,及电偶电流随时间变化规律的影响;
- Gets the start and end positions for the source of the current method. 获取当前方法的源的起始和结束位置。
- Describes the chain of callers leading up to the current method call. 描述调用方链,该链最终导致当前方法调用。
- Abstract : Objective To measure the magnitude of galvanic currents produced by different occluding metallic contact. 摘要 : 目的:测定异种合金咬合接触时产生的电流值。
- Abstract: Objective To measure the magnitude of galvanic currents produced by different occluding metallic contact. 文章摘要: 目的:测定异种合金咬合接触时产生的电流值。
- The results showed that the potential of occluded specimen and the galvanic current between the external bulk and occluded specimen were strongly affected by the applied potential. 实验结果表明,外电位对闭塞区内电极电位和闭塞区内外电极间电偶电流影响很大,氯离子迁出率也与外电位密切相关。
- The calling convention, number and type of arguments at the destination address must match that of the current method. 位于目标地址的参数的调用约定、数目和类型必须与当前方法的这些项匹配。