您要查找的是不是：
- fusion casting mould 熔融浇注模
- Design casting mould and LV mould timely and correctly. 及时、准确地设计浇铸模具和LV模具。
- By means of casting mould, twelve lungs of viverricula indica were dissected. 应用铸型方法研究了小灵猫的肺段支气管及支气管肺段。
- Objective To improve the method of casting mould of lymphatic vessel in organs. 目的:对器官内淋巴管铸型方法进行改良。
- P &T precision ,specialize in sheet metal stamping tool and die casting mould fabrication. 奥启盛专业于设计、开发精密模具。金属模具及铸压模制作。
- P&T precision ,specialize in sheet metal stamping tool and die casting mould fabrication. 奥启盛专业于设计、开发精密模具。金属模具及铸压模制作。
- The main products are: die-casting mould, metal-gravity die casting, sand casting mould, lost wax casting die. 主要产品有：压铸模、金属型重力铸造模、砂型铸造模、失蜡铸造模。
- The results show that the aluminum ingot casting mould with annealed ferrite has the longest life. 结果表明,退火铁素体铝铸锭模使用寿命最长。
- Application:Used for sand casting mould workshop,repairing the lining of steel making furnace and impacting the con crete on building. 用途：适用于砂型成型的铸件车间、炼钢和炼铁炉衬的修补以及建筑场所的混凝土捣固作业。
- For revealing heat transfer at casting interface,using pentahedron element link the elements of casting and casting mould. 作用6结点5面体单元连接铸件与铸型的单元，真实反映铸件与铸型之间的传热现象。
- Microstructural changes of a fusion cast Al2O3-ZrO2-SiO2 (AZS) block taken from the side wall of a glass tank furnace were studied by scanning electron microscopy, energy dispersive spectroscopy and X-ray diffraction. 借助扫描电镜、能谱仪和X射线衍射研究了玻璃熔窑池壁用熔铸Al2O3?ZrO2?SiO2(AZS)大砖蚀变后残砖的显微结构变化。 在玻璃液?
- The improvement of slab equiaxed crystal ratio by electric pulse on liquid steel in continuous casting mould at Pan steel slab castor No. 从结晶器施加电脉冲输入能量、钢液过热度、电极间距三方面,探讨电脉冲处理提高铸坯等轴晶率的效果。
- The interface between glass in R_2O-BaO-SiO_2 system and fusion cast Al_2O_3-ZrO_2-SiO_2 refractory after high-temperature reaction has been investigated by the electron probe microanalyser(EPMA). 本文运用电子探针研究了以R_2O-BaO-SiO_2为基础的玻璃与电熔Al_2O_3-ZrO_2-SiO_2耐火材料高温作用时形成的界面;
- Simulation results show that the application of multivariate statistics method to monitor continuous casting mould process is feasible. 仿真结果表明，多变量统计方法应用于连铸结晶器过程的监测是可行的。
- The continuous casting mould oscillating equipments can ensure the slab and walls of mould not to be slabby together to obtain good cast slab surface quality. 连铸机结晶器振动装置可以保证在浇铸过程中板坯与结晶器壁不发生粘结以获得良好的铸坯表面质量,所以要求液压振动系统运动轨迹准确,精度高,稳定性好。
- Proportion of Metal Loss in Fusion Casting Process 金属在熔炼过程中的损耗计算
- A three-legged ejector sleeve is adopted in the die casting mould to take cast stripping mould, the problem that the cast difficultly demould is solved. 采用三脚推管推出铸件，解决了轴套铸件脱模难的问题。
- Mould products includes injection moulds, stamping moulds, casting moulds, etc. 主要经营注塑模具，冲压模具，压铸模具等等。
- According to the determined machining conditions, the forging mould and die casting mould are machined.It is revealed that the MEDM PMD technique can... 以文中确定的加工工艺条件对锻造和压铸模具进行混粉电火花镜面加工,结果表明,该技术能提高模具制造质量,降低工人劳动强度,缩短模具制造周期。
- According to the Specific Character of SPHD Steel and FTSC Sheet bar, analyzed the Physical Chemistry Index of Protecting Powder for the Casting Mould of SPHD Steel. 本文根据SPHD的钢种特性和FTSC薄板坯连铸机的工艺技术特点,分析了浇注SPHD钢的结晶器保护渣应具备的理化指标。
