您要查找的是不是:
- frictional heat source 摩擦热源
- friction heat source 摩擦热源
- Do not place LCD on heat source positions. 不要把显示器放在热源位置上。
- Do not bleach and leave to dry away from heat source. 不要漂白也不要用加热来烘干它。
- This depends on the estimation of the temperatures generated by frictional heat. 它取决于摩擦热所引起的温度估算。
- Dry, cool conditions, faraway from fire and heat source. 干燥;凉爽环境下;远离火源;热源.
- FWG capacity test is carried out using jacket water of M/E as heat source. 以主机缸套水作为热源,进行造水机制淡产量试验。
- The result shows that it is mainly caused by the martensite with high hardness produced after rail absorbing frictional heat. 断裂的主要原因是钢轨在吸收摩擦热后产生了高硬度的马氏体。
- We suggest sharpening on a wet stone because it cleans the pores of the sharpener dissipates frictional heat and facilitates smooth sharpening action. 我们建议使用一块弄湿了的磨石,因为研磨液体能帮助清洁磨具上的孔,能散去摩擦产生的热量,还能使磨刀的动作更加顺滑。
- Ambient air, exhaust air, soil and rock are the most common heat source types. 室外空气、回风、土石是目前常见的热源形式。
- The influences of the steady-state frictional heat on the contact performance of surface asperities and subsurface stress distribution in contact bodies were investigated. 研究了摩擦力和不同热输入情况下圆柱体与弹塑性平面的接触力学特性。
- Keep away from dust, humidity, rain, heat source and direct sunlight. 尽量避免灰尘、潮湿、雨水、高温和直接阳光照射。
- Friction heat of crude oil is obvious in non-Newtonian laminar flow, which can't be ignored. 结果表明:当原油处于非牛顿层流状态时,摩擦热的影响不可忽略。
- Keep away from dust, humidity, rain, heat source and direct sunlight. Fragile. 远离灰尘、潮湿、雨水、热源和阳光的直接照射。小心轻放。
- Abstract: A quantitative heat-producing model of faulting was constructed proceeding from the basin stress state analysis and from the viewpoint of frictional heat production. 摘 要: 从盆地的应力状态分析入手,从断层摩擦生热的角度,建立了断层作用生热的定量模 型。
- Grinding technology with no frictional heat by using cooling water pump technology allows the resultant powders to retain flavours and nutritional components. 研磨的技术是使用冷却水抽送系统来消除磨擦热,这使得最后的粉末表面保持新鲜面和无异味
- The simplest convection model is that of a contained layer of liquid sitting above a point heat source. 最简单的对流模式,是处在一个局部热源上流体的封闭圈层的模式。
- Abstract: Chinese products abroad for "anti-dumping," the friction heat to become the focal point of trade disputes in the issue. 内容摘要:国外针对中国产品“反倾销”的摩擦不断升温,成为贸易纠纷中的焦点问题。
- This is a porous membrane because of the reason, to maintain cutting oil to reduce friction heat, to prevent wire into the attack surface effect. 此皮膜因是多孔质的原故,能保持住切削油减少摩擦热,有防止丝攻表面融着的效果。
- Conclusion The microwave energy is a good heat source in cured denture base materials. 结论微波能是一种良好的固化义齿基托材料的热源。