您要查找的是不是：
- This paper presents the principle of friction stir processing. 本文介绍了搅拌摩擦处理FSP(Friction Stir Processins)。
- Keywords friction stir process（FSP）;microstructure;equiaxed grain;eutectic; 搅拌摩擦加工;微观组织;等轴晶;共晶体;
- Kwon Y. J., Saito N., Shigematsu I., Friction stir process as a new manufacturing technique of ultrafine grained aluminum alloy, J Mater Sci Lett, v21, 1473-1476, 2002. 胡哲明，摩擦搅拌制程之应变率对奈米氧化铝粉均匀分布与机械性质的影响，中山大学材料所硕士论文，民国93年。
- accumulation of friction stir processing 重复搅拌摩擦加工
- friction stir processing (FSP) 搅拌摩擦加工
- friction stir process(FSP) 搅拌摩擦加工
- UFG coupper plate prepared by the forced cooling friction stir processing 用强冷摩擦搅拌工艺制备超细晶紫铜板材
- Ultra-fine grain material;Grain refine;Plasticity;Damping capacity;Friction interface thermo-induced transferring method (FITT);Cooling friction stir processing (CFSP 01超细晶材料;晶粒细化;塑性;阻尼性能;摩擦面热诱导转移法;强冷搅拌摩擦工艺
- friction stir processing 搅拌摩擦加工
- Keywords Ultra-fine grain material;Grain refine;Plasticity;Damping capacity;Friction interface thermo-induced transferring method （FITT）;Cooling friction stir processing （CFSP）; 超细晶材料;晶粒细化;塑性;阻尼性能;摩擦面热诱导转移法;强冷搅拌摩擦工艺;
- friction stir process 搅拌摩擦加工
- Friction stir welding is a novel solid-phase joining technique. 搅拌摩擦焊是一种新型的固态连接技术。
- Friction stir welding (FSW) is a relatively new solid-state joining process and great development has been achieved in recent years. 摘要搅拌摩擦焊是一种新型的固相焊接工艺，在近些年取得了巨大的研究进展。
- There re some problems in traditional welding process of stainless steels, and Friction Stir Welding (FSW) becomes an effective approach in stainless steels welding. 摘要传统熔焊工艺焊接不锈钢存在诸多问题，搅拌摩擦焊接是解决这些问题的有效途径。
- With plenty of experiments, the parameters of copperplate friction stir welding are optimized. 通过大量试验分析,优化了铜板搅拌摩擦焊接工艺。
- This paper studied the friction stir welding (FSW) for ZL114A cast aluminium alloy. 摘要研究了ZL114A铸造铝合金的搅拌摩擦焊。
- Rotation speed is one of the key reasons which are relative to the quality of friction stir welds ... 搅拌工具旋转速度是影响接头成型形貌的关键原因之一,速度过低有可能会导致隧道型孔洞缺陷。
- Rotation speed is one of the key reasons which are relative to the quality of friction stir welds and tunnel defect existes at lower rotation speed. 搅拌工具旋转速度是影响接头成型形貌的关键原因之一，速度过低有可能会导致隧道型孔洞缺陷。
- Taking aluminum foils as a tracer material, friction stir welding was conducted by using different thread direction and different pitched pin. 采用铝箔作为标示材料,用不同旋向、不同螺距的搅拌针进行了搅拌摩擦焊试验。
- The transfer of plasticized materials was an important factor for ensure the full metallurgy of weld in friction stir welding. 在搅拌摩擦焊过程中,焊缝塑性材料的迁移是保证焊缝的冶金完整性的重要因素。
