您要查找的是不是:
- Keywords four screw extruder;central area;circumfluence;flow field analysis; 四螺杆挤出机;中心区;环流;流场分析;
- Knowledge of General maintenance of twin screw extruder and mixers. 了解搅拌机和双螺杆挤出机的基本维修。
- The way how to improve the design of screw extruder used for hot briquetting process is introduced. 介绍了热压型焦工艺设备螺旋挤压机设计改进情况。
- A series of silane grafted polyethylenes were prepared by using the twin screw extruder. 以双螺杆挤出机为反应器,制备了一系列硅烷接枝高密度聚乙烯。
- The maleation of ABS by using a single screw extruder and dicumyl peroxide as initiator was studied. 以过氧化二异丙苯为引发剂,采用单螺杆挤出方法实现了ABS树脂接枝马来酸酐。
- A series silane grafted polyethylenes were prepared by using the twin screw extruder. 以双螺杆挤出机为反应器,制备了一系列硅烷接枝聚乙烯。
- Each shelf is a board held on with four screws. 每块架板用四个螺钉固定。
- The single screw extruder is an important component in extrusion of polyolefin production. 单螺杆挤出机是一个重要的组成在挤压聚烯烃生产。
- With a windowed twin screw extruder the authors conduct several visualization extrusion experiments. 在可视化双螺杆挤出实验的基础上,阐述了熔融过程中物料运动的多样性问题。
- The line use highly active screw extruder that we developed, and it has the characteristics ... 发布者:吴晓红所在地:山东青岛市行业:机械及行业设备职位:经理工作年限:
- The processing equipments of FEP masterbatch are single screw extruder and double screw extruder. FEP色母粒的加工设备有单螺杆挤出机和双螺杆挤出机两种。
- Remove the four screws holding the first check valve cover. 拆卸固定第一止回阀阀盖的四个螺丝。
- PE/MMT nanocomposites were fabricated using melted intercalation by a double screw extruder. 在双螺杆挤出机上采用熔融插层法制备了PE/MMT纳米复合材料。
- The structure and the performance of the single screw extruder of electromagnetism dynamic are presented. 简要介绍了电磁动态单螺杆挤出机的结构性能,分析了螺杆在振动力场作用下的轴向受力状况。
- This production line adopts single or twin screw extruder as the customers actual production needs. 这条生产线采用单一或双螺杆挤出机作为客户实际生产的需要。
- To adjust the four screws of the supporter to suitable height. 调整机器底下四个螺丝脚座,可顶高轮子到合适的高度。
- The mixing facilities have experienced the following steps: Roll mixer,Banbury mixer,Single screw extruder,Twin screw extruder and Twin rotor continuous mixer. 混炼设备的发展经历了下列几个主要阶段:开炼机、密炼机、单(双)螺杆挤出机和双转子连续混炼机。
- Rheological properties of HDPE/montmorillonite( MMT) nano-composite and HOPE were measured using a slit die rheometer attached to an industrial-scale single screw extruder. 采用两种不同口模厚度的窄缝流变仪研究了高密度聚乙烯(HDPE)/蒙脱土(MMT)纳米复合材料及其基体HDPE的流变性能。
- The process of imported twin screw extruder as finishing equipment of adhesive chloroprene rubber(CR 244)was introduced. 介绍了用进口双螺杆挤出机作为粘接型氯丁橡胶(CR244)后处理装置的工艺流程,探讨了其工艺条件及成品橡胶的性能。
- Maleic anhydride(MAH) and styrene(St) melt-grafting onto polypropylene(PP) was conducted in haake torque rheometer and twin screw extruder. 在哈克流变仪和双螺杆挤出机对苯乙烯(St)/马来酸酐(MAH)/聚丙烯(PP)熔融接枝进行了研究。