您要查找的是不是:
- Farther more the influence of foam agent, carbonizing agent and dehydration catalyzer was discussed. 分别研究了发泡剂、催化剂以及成炭剂等对防火涂料防火、防腐蚀性能的影响。
- Based on the choice of PAS or CTAB as foam agent, NAPS as stable agent, the prescription of NACP foam system for displacing oil was studied, and oil displacement effect of this system was appraised through core floating experiments. 在已优选PAS或CTAB作为起泡剂,NAPS作为稳泡剂的基础上,对驱油用NACP泡沫体系的配方进行了研究,并通过岩心流动实验评价了该体系的驱油效果。
- The result shows that foaming performance of DP-4 type of foam agent is good, and EOR will increase 18%. 结果表明 ,DP- 4型泡沫剂的泡沫性能良好 ,可提高采收率 18%25。
- The batch of obsidian foam glass consists of obsidian tailing,cullent power and foaming agent. 黑曜岩泡沫玻璃配合料由黑曜岩废料、玻璃粉和发泡剂组成。
- The product is the ideal foaming agent for EPS poly sty rene,with the fllowing. 该产品具有稳定性好,发泡倍率大,沸点高,损耗小等特点,是EPS聚苯乙烯理想的发泡剂。
- Effects of foaming agent、vulcanizer and the match of the two on the compress stress relaxation of the silicone rubber foam were studied. 研究了发泡剂用量以及发泡剂与硫化剂之间的匹配等对硅橡胶泡沫材料压缩应力松弛的影响。
- Effects of foaming agent vulcanizer and the mach of the two on the compress stress relaxation of the silicone rubber foam were studied. 研究了发泡剂用量以及发泡剂与硫化剂之间的匹配等对硅橡胶泡沫材料压缩应力松弛的影响。
- The interfacial properties of anionic foaming agent BS-12 and the performance properties of CO2/BS-12 foam for EOR are investigated. 研究了泡沫驱用阴离子起泡剂BS-12的界面特性及其与泡沫特性的关系。
- The gelled foam comprises of water, gas foaming agent (surfactant), stable foam agent (polymer ) and cross-linking agent. 冻胶泡沫是由水、气、起泡剂(表面活性剂)、稳泡剂(聚合物)和交联剂组成。
- The fly-ash foam glass was made with fly ash and cullet as main material, and some foaming agent, flux was mixed into as auxiliary material. 以粉煤灰和废玻璃为主要原料,添加适量发泡剂、助熔剂等制备粉煤灰泡沫玻璃。
- The vulcanization characteristics of a silicone rubber foam made by technology of removing inert filler used as foaming agent was investigated with curometer. 采用橡胶硫化仪研究了溶析成孔工艺制备的硅橡胶泡沫材料的硫化特性,分析讨论了硅橡胶的结构、成孔剂用量对硫化特性的影响规律。
- It is under development to replace freon with CO_2.In America,DOW Plastics Company studied successfully to use CO_2 as foaming agent instead of polystyrene foam plate. CO_2代替氟里昴的应用正在开发,美国道塑料公司研制成功了用 CO_2代替现有聚苯乙烯泡沫板用发泡剂。
- The effects of the content of foaming agent as well as the kinds and content of foam stable agent on the foamability and the adhesion strength were investigated. 考虑了发泡剂用量、泡沫稳定剂种类及用量对发泡倍率和粘接强度的影响。
- The production process,technical characteristics and equipment of flexible polyurethane foam using liquid carbon dioxide as physical foaming agent were introduced. 介绍了以液体二氧化碳作物理发泡剂生产软质聚氨酯泡沫的生产工艺、技术特点及其设备;
- The preparation of ADC foaming agent from biurea by dioxygen catalytic oxidation was investigated and discussed. 对用分子氧催化氧化联二脲制取ADC发泡剂进行了探讨。
- The best foaming condition is happened by adding 7% PYA resin and 4% foaming agent. 实验结果显示聚七烯醇树脂浓度为7%25及发泡剂添加比例为4%25时具有最佳发泡结构。
- And some decompound production of foaming agent can reinforce the foaming ability of refining slag. 发泡剂分解后部分产物作为高熔点粒子存在于熔渣中,提高了精炼渣的泡沫化性能。
- It consists of special resin, foaming agent fire-proofing agent, carbonic agent, pigment and filler. 由特殊树脂,加上发泡剂、防火剂、成碳剂以及颜填料等组成。
- The surface of the water is full of foam. 水面都是泡沫。
- The nano-SiO2, azodicarbonamide (AC) composite foaming agent, was prepared by immersion method. 本论文以发泡剂偶氮二甲酰胺和纳米二氧化硅为原料,利用浸渍法成功制备出新型偶氮二甲酰胺-纳米二氧化硅复合发泡剂。