您要查找的是不是:
- fluorescent penetrant method 荧光探测法,荧光探伤法
- Post emulsifiable fluorescent penetrant testing method 后乳化性荧光渗透探伤法
- Perform fluorescent penetrates check on turbine components. 完成对燃机部件的荧光渗透检测。
- The surface quality of high carbon continuous rolled slab and steel plate after rolled are tested by penetrant method and the defaults morphology and resource are analyzed. 利用表面渗透探伤法对高碳钢连轧坯和轧后钢板的表面质量进行了检验,并且对缺陷形貌和来源进行了分析。
- Combined colour comtrast and fluorescent penetrant 着色荧光渗透剂
- Combined colour contrast and fluorescent penetrant 着色荧光渗透剂
- Only the penetration method has been used to any appreciable extent. 只有穿透法获得了较广泛的应用。
- fluorescent penetrant inspection 荧光渗透检验
- All attachment areas in ferromagnetic materials shall be examined by the magnetic particle technique, if this is not possible by liquid penetrant methods. 铁磁体材料上所有粘附表面,若不能作渗透检测,可采用磁粉检测方法。
- Base fog Combined colour comtrast and fluorescent penetrant 着色荧光渗透剂回波指示
- Test Method for Yield Stress of Heterogeneous Propellants by the Cone Penetration Method (05. 用针入法测定非均质推进剂的屈服应力的试验方法(05。
- Candidates with Working experience at performing fluorescent penetrant inspection, or other NDT method working experience is preferred; 有荧光渗透探伤操作;或其它无损检测方法的工作经验者优先考虑.
- The method seems good but it needs to be tried out. 这个方法似乎不错,但需要试验一下。
- Reheating state and thixotropic behavior of semisolid hypoeutectic Al-Si alloy were investigated by the penetration method. 采用浸入法研究了半固态亚共晶铝硅合金的二次加热状态及其触变性能。
- The liquid penetration method, procedure, defect indication and indication characters of pipe welds in boiler were described simply in this article. 对锅炉管道焊缝液体渗透检测方法、操作程序、缺陷显示及痕迹特征作了简单介绍。
- Application of Water Solved Self-emulsification Fluorescent Penetrant 自乳化水洗型荧光渗透液应用技术
- The research shows that the carbon absorption rate can be up to 90% approximately by using the pretreated carbon powder and precast block penetration method. 研究表明,经过预处理的碳粉,采用预制块压入法可使碳的吸收率稳定在90%25左右。
- WATER-BASED PRE-CLEANING TECHNOLOGY FOR FLUORESCENT PENETRANT INSPECTION 荧光渗透探伤水基预清洗方法
- Using TEOS and Ti(OBu)4, etc. as modifying material , wood samples were nano modified by means of microwave technology, supersonic dispersing method and pressure penetrating method etc. 摘要采用纳米合成技术,以正矽酸乙酯、钛酸丁酯等作为改性木材的前驱体,结合微波扩孔技术、超声分散技术、压力浸渍等方法,对木材进行了改性。
- Methods Dye penetration method was used to observe marginal microleakage with or without Superbond on teeth in vitro. 方法应用染料渗入法,在离体牙上观察银汞合金在应用与不应用粘接剂的条件下的边缘微漏。