您要查找的是不是：
- S.G. Kandlikar, An improved correlation for predicting horizontal and vertical tube, Two-phase Flow and Heat Transfer Conf. Seattle, W.A.(1983). 王维城;刘志坚;王补宣;张立宁.;强化水平管内流动沸腾换热的实验研究
- The abnormal flow and heat transfer disciplinarian of the working fluid in CPL induce the CPL non-steady-operation. 诱发CPL不稳定性运行的因素是CPL管内流动和传热的异常变化规律。
- A flow and heat transfer model of a vehicle cooling system has been modeled in order to predict its characteristics. 摘要根据传热学和流体力学原理，对车辆冷却系统建立数学模型，并进行了仿真计算。
- A numerical study has been carried out on flow and heat transfer in the dry slag removal system (DSRS). 本文对锅炉干排渣机内的空气流动和传热进行了数值模拟,并将数值结果与实验数据进行了比较。
- The periodicity of the flow and heat transfer in a corrugated channel is numerically investigated. 本文对锯齿型通道内流动与换热的周期性进行了数值模拟。
- A separated model is developed for the recirculating flow and heat transfer in a kettle reboiler tube bundle. 提出了釜式再沸器管束中循环流动换热的分相预报新模型,考虑了管束下部的过冷沸腾及循环液体的侧面引入。
- As the emissivity increases, the radiative transfer increases, and hence the fluid flow and heat transfer increases. 在几何外型上，较大的长宽比，其热传效果较差，但流体速度及平均温度较高；
- Butterworth D, Hewitt G F. Two-phase flow and heat transfer [M]. New York: Oxford University Press, 1997. 陈宣政.;气液两相环状流形成及垂直下降管内流型的研究[D]
- A coupled system includes the coupled flow and heat transfer between fluid and solid parts, besides coupled heat transfer among solid parts. 该系统既包括了流体和固体之间的流动与传热的耦合，也包括了固体与固体之间的耦合传热。
- A set of equations of fluid flow and heat transfer were derived from two-phase fluid dynamics and fluid-solid conjugated heat transfer (CHT）. 基于两相流体动力学及流固耦合传热建立了流动与传热方程。
- A three-dimensional CFD model using the volume of fluid(VOF) method was presented for predicting the steady two-phase flow and heat transfer process. 利用流体体积法建立了蜂窝型加湿器的流体动力学模型(CFD),反映了稳态的三维气液两相流动的传热传质过程。
- The experiment aimed at the flow and heat transfer characteristics of different forms of nanometer particles in the oscillating heat pipe（OHP）. 摘要主要针对不同形态的纳米颗粒在振荡热管内的流动及热传输特性进行了实验研究。
- A three-dimensional numerical analysis model of fluid flow and heat transfer in pulsed current TIG weld pool is developed. 对运动电弧作用下脉冲TIG焊接熔池流场与热场动态变化过程建立了三维数学模型。
- A set of equations of fluid flow and heat transfer were derived from two-phase fluid dynamics and fluid-solid conjugated heat transfer (CHT). 基于两相流体动力学及流固耦合传热建立了流动与传热方程。
- Numerical simulation of flow and heat transfer on CW p rimary surface recuperator[ J ].Jour2 nal of Engineering Thermophysics, 2006, 27 ( 3) : 490-492. CW原表面回热器的芯体内流动与传热数值模拟[ J ].;工程热物理学报;2006;27 (3) : 490-492
- So it is necessary to study the flow and heat transfer characteristics of crossflow jet in T-junction and restricted jet in pressurizer. 实验工况涵盖了实际工程中可能遇到的所有工况。
- Based on the feature of two-phase fluid flow and heat transfer, a nonlinear lumped-parameter mathematical model is given. 针对蒸发区汽水两相流动的特点,建立了蒸发区的非线性集总参数动态数学模型;
- Fluid flow and heat transfer of TIG welding arc and pool were analyzed based on built model with finite element analysis method. 采用等效比热法来确定液相分数,假定固液相等同区来解决工件熔化区与非熔化区的移动边界。
- A three dimensional model for fluid flow and heat transfer in sodium pool of a fast breeder reactor(FBR) is built on mass, momentum and energy conservation laws. 针对快中子增殖反应堆钠池的流动传热特点，以质量、动量、能量守恒定律为基础，建立有关快堆钠池流动传热的三维数学模型。
- The characteristics of natural convection flow and heat transfer inside the aerostat are obtained.The shift of convective heat transfer coefficient has been presented. 通过计算，初步了解了囊内自然对流流动和换热的特点，得到了表面对流换热系数的变化规律。
