您要查找的是不是:
- flexural compressive strength 弯曲抗压强度
- The relationship between compressive strength (flexural strength) with ice temperature, stress and direction is analysed in the paper. 分析了海冰的压缩强度和弯曲强度与冰温、应力率和加载方向的关系。
- The experiments included compressive strength, flexural strength, shear strength of sand grouts, stability and fluidity of net grouts. 试验内容包括砂浆的单压、抗弯、抗剪强度试验以及净浆稳定性和流动度试验。
- The compressive strength of the G/C is similar to, and the flexural strength is lower than, those of carbon felt/pyrocarbon composites. 复合材料的力学性能比纯石墨高一倍,抗压强度与炭毡增强C/C复合材料相当,弯曲强度比炭毡增强C/C复合材料略低。
- The compressive strength was as high as 350MPa. 抗压强度高达350MPa以上。
- Comparison of compressive strength:Ceram. 压缩强度比较;Ceram.
- The influence of silane coupling agent on the density, delamination degree, flexural strength and compressive strength of various kinds of composite cement mortar was studied. 通过红外光谱分析及砂浆强度测试,研究了硅烷偶联剂对不同种类复合水泥砂浆的稠度、分层度、抗折强度及抗压强度的影响。
- The influence of the aggregates content on the electrical conductivity, compressive strength and the flexural strength of the conductive concrete are analyzed. 分析了集料用量对融雪化冰用碳纤维导电混凝土导电性能、抗压强度和抗折强度的影响。
- The results show that the flexural strength and compressive strength of fabric reinforced mortars with the main bars braid in plait were higher than that of the main bars braid in interlacement. 结果表明:辫子状主筋织物增强水泥砂浆的抗折、抗压强度比交织状主筋织物增强水泥砂浆的大;
- Standard forms for concrete compressive strength test cube. 混凝土抗压试模。
- Standard forms for grout compressive strength test cube. 砂浆试模。
- From the ratio of strain modulus and flexural strength and the ratio of compressive strength and flexural strength, and others physical and mechanical parameters, the quality of the fine grain ethanol model ice was comprehensively assessed. 阐明细粒酒精模型冰历史资料的可靠性,从模型冰变形模量与弯曲强度的关系和压缩强度与弯曲强度的关系,以及其它物理和力学参数入手,综合评价了细粒酒精模型冰的质量
- Attaining the unification about the compressive strength unde... 以达到产品耐压强度?焙烧温度?成品率三者的统一。
- Adding micro-filler improves compressive strength of SRC. 添加微填料能够增加SRC的抗压强度;
- The compressive strength and porosity of the product are measured. 对制品进行抗压强度和气孔率的测试观察.
- An experimental study was performed on the compressive strength, flexural strength, elastic modulus, and fracture energy of steel fibre reinforced concrete from an angle of effective utilization of this kind of concrete. 摘要为有效利用钢纤维混凝土,对钢纤维混凝土的抗压强度、抗弯强度、弹性模量和断裂能等进行了试验研究。
- The BP neural network is established to predict the compressive strength,the flexural strength,the tensile strength and the shear strength of steel fiber reinforced concrete at minus temperature. 利用BP网络对负温钢纤维混凝土的实验所得到的抗压强度、抗折强度、抗拉强度、抗剪强度进行了仿真预测。
- Compressive strength, splitting strength, flexural strength, compressive resilience modulus and flexural resilience modulus of cement stabilized stone of different structure types were tested. 并对不同结构类型水泥稳定碎石材料的抗压强度、劈裂强度、抗折强度、抗压回弹模量以及抗折回弹模量进行了试验研究。
- The test results show that hybrid fibers increase concrete's compressive strength, splitting tensile strength and flexural strength, but it have little effect on concrete's impermeability. 结果表明,混杂纤维可以提高混凝土的抗压强度、劈拉强度和抗折强度,但对混凝土抗渗性能影响不大。
- Compressive strength is the ability of a material to resist being crushed. 耐压强度是金属抵抗被压碎的能力(性能)。