您要查找的是不是：
- fixed end beam 固定端梁
- Vibration and stability are investigated for an axially moving beam constrained by a pinned end and a fixed end. 摘要研究一端简支一端固支轴向运动梁的横向振动和稳定性。
- fixed ended beam 固端梁
- The fixed end moments acting on the member are ignored for the moment. 作用于该杆上的固端力矩暂且都不考虑。
- In the calculation of fixed end moments, joints B and C are temporarily locked. 在计算固端弯矩时，临时锁住共点b和C。
- It operates to exclude recognition of everything except what squares up with the fixed end in view. 这种目的除了与固定目标相符的事物以外,其他事物概不承认。
- Another theory is that having a greater mass under the fixed end of the reed somehow improves the vibratory properties of the reed itself. 还有一个理论认为簧片固定端下面较大的质量会提升簧片的振动特性。
- FLOW externally molded onto the body to indicate the fixed end containing a TFE seat. 流向)模铸在阀体的外部，表示配置TFE阀座的固定端口。
- Each microactuator consists of two PT arms that are jointed at the free end and connected to an anchor at the fixed end. 该微驱动器由两个光热膨胀臂构成，两者在自由端相互连接，而在固定端分别通过细桥与基底相连。
- Improvement on Bridge Type Hoist End Beam 桥式起重机端梁制造工艺改进
- double end beam supporting system 双端梁支承系统
- When competition, the athlete has on the elastic in an end fixed end springboard to take off completes the diving movement to call the springboard diving (springboard is apart from water surface highly gauge to decide as 1 meter and 3 meters). 比赛时，运动员在一端固定一端有弹性的跳板上起跳完成跳水动作称跳板跳水（跳板距水面的高度规定为1米和3米）。
- The tables are firmly fixed to the floor. 桌子都牢牢地固定在地板上。
- SL cylindrical roller bearings are heavy series full complement double row bearings.Thee are two types:one has unfixed end (Series SL01 and Series SL04),the other has fixed end (Series SL02). SL型圆柱滚子轴承是双列满滚子型超重负荷轴承，有固定侧(SL01型，SL04型)和自由侧（SL02型）两种。
- The accident put an untimely end to the party. 意外事故使聚会匆匆结束了。
- In this paper, the lamination board models with fixed ends were established with MARC and the mode analysis was carried on. 摘要用有限元软件MARC建立了具有脱层和无脱层的两端固支层合板模型，并进行了模态分析。
- The boys were itching for the lesson to end. 那些男孩子们渴望下课。
- When joining the fixed end of a single union valve, place the ball in the open position to allow for proper drying and to avoid primer or solvent cement contacting internal components of the valve. 在连接单个管套接阀门的固定端口时，将球体放置在开启位置，使得阀内部件能够得到干燥并避免底漆或液状粘固剂接触到阀内件。
- The man jacked up his car to fix a flat tire. 那人用千斤顶把他的汽车顶起以修理漏气的轮胎。
- I bought a run-down farm house and plan to fix it up. 我买了一间破败的农舍，打算整修整修。
