您要查找的是不是：
- This model helps to make a non-linear finite element program which is tested and verified by the example in UMT. 在此基础上，建立了城市轨道交通桥梁无缝线路纵向力的空间一体化力学模型，编制了非线性有限元模型，通过实例进行了模型验证。
- Based on classical consolidation theory developed by BIOT,3-D finite element program coupling deformation and pore-pressure is coded. 根据经典比奥固结理论,编制了可以考虑孔压、位移耦合的三维有限元程序。
- Planar triangular finite element program can be used to calculate the displacement, stress. 平面三角形有限元程序，可以用来计算位移，应力。
- The dynamic finite element program of bonded prestressed concrete beams was designed. 本文对有粘结预应力混凝土简支梁进行动力有限元程序设计。
- The spatial computation model of a cable bridge was established by the finite element program MIDAS. 索道桥是以钢丝绳为主要受力构件的一种柔性悬索体系桥梁。
- The finite element program ABAQUS was applied to study the numerical simulation of failure process of steel frame-RC corewall hybrid structure. 摘要利用ABAQUS通用有限元程序对钢框架-钢筋混凝土核心筒混合结构的破坏过程进行了数值模拟。
- Dynamic responses of the three models under the underwater osculatory explosion were calculated by the nonlinear finite element program LS-DYNA. 利用非线性有限元程序LS-DYNA，分别模拟计算出它们在水下接触爆炸荷载作用下的动力响应。
- The overall stability tests of monosymmetric I-shaped overhanging beams and two-span continuous beams are simulated by finite element program ANSYS. 利用ANSYS有限元程序对单轴对称工字形单伸臂梁和双跨连续梁整体稳定试验进行了有限元模拟。
- At last, the stress condition of the CSW box girder bridge over Yong Xin River of Ningbo is analyed with a general finite element program. 最后以宁波甬新河波形钢腹板箱梁桥为背景,运用大型通用有限元程序对该桥进行了成桥状态的应力分析。
- Taking a through bridge with rigid suspender and tie-arch for example, the space stability is analyzed by means of finite element program. 以某下承式刚性吊杆系杆拱桥为实例,利用空间有限元程序对其空间稳定性进行分析。
- The finite element models of axial tension member and eccentrical tension members are established with ANSYS finite element program. 4、用通用有限元分析软件ANSYS建立了混凝土轴心和偏心受拉的有限元模型，进行分析并得到了受拉构件的应力云图、变形图及开裂图，并与理论分析结果进行了比较。
- The finite element program design method has laid a solid foundation for in depth reseach of physical thoracic impedence rheogram wave form. ? 该程序设计方法为进一步深入研究人体胸腔阻抗血流图波形的成因打下了基础。
- Based on the Biot consolidation theory, a plane strain consolidation finite element program PCONMCC taking the Modified Cam-clay constitutive model is compiled. 以比奥固结理论为基础,采用修正剑桥模型,编制了平面固结有限元程序。
- The plate subjected to underwater explosions was simulated by the finite element program LS-DYNA, then the results were analyzed and the maximum stress was obtained. 采用有限元程序LS-DY-NA对水下爆炸载荷作用下的钢板进行仿真计算，对计算结果进行分析，得到板的最大应力值；
- A simple model for the finite element analysis of piled raft foundation is prosposed and this calculational process is realized by the finite element program ANSYS. 提出一种有限元简化模拟桩筏基础体系的计算模型,利用有限元软件ANSYS实现这一计算过程。
- A concrete material model for penetration computation was presented, and the ogive-noded rod projectile penetrating concrete target was simulated by a 3D finite element program. 摘要介绍了一种适用于侵彻计算的混凝土材料模型。通过所建的有限元程序对杆弹侵彻混凝土靶进行了数值模拟。正侵彻的计算结果和实验结果具有较好的一致凌。
- Based on that, a finite element program which solves temperature stress of CFST arch rib is made so that the temperature stress of CFST arch bridge is analyzed qualitatively. 在此基础上，编制求解钢管混凝土拱肋温度应力的有限元程序，定性分析了钢管混凝土拱桥的温度特性.
- A three-dimensional computational study for the process of shooting heavy cluster warhead by gasbag has been performed using finite element program of LS-DYNA. 利用LS-DYNA有限元软件对用气囊抛撒重型子弹药的过程进行了数值模拟。
- The technology of bending by bendable roller (BBBR) was introduced briefly.A finite element model of the process of BBBR was built by the general finite element program. 摘要简单介绍了可弯曲辊卷板成形技术，利用通用有限元程序建立了可弯曲辊卷板成形过程的有限元模型。
- The LS-DYNA finite element program was applied to the research of human body kick-off under the combined wave of double semi-sine wave with positive and negative value. 为了研究两半正弦正负相组合波形作用下人员抛离问题,以LS-DYNA程序为工具,计算了立姿人体抛离时程曲线。
