您要查找的是不是:
- finite element FEM 有限元FEM
- The FEM (Finite Element Method) is a widely used numerical tool in engineering. 有限元法(Finite Element Method)是工程领域广泛应用的一种数值计算方法。
- The dielectric discontinuities in waveguides Eire analysed by finite element method (FEM) in combination with perfectly matched layers (PML). 本文将矢量有限元法(FEM)与完全匹配层(PML)相结合对波导介质不连续性问题进行分析。
- Study Design. In vivo study of a computed tomography (CT)-based nonlinear finite element model (FEM). 研究设计:基于CT的非线性有限元模型(FEM)的体内研究。
- A novel design of TiNi/Si composite membrane microactuator is studied with finite element methods(FEM). 应用有限元方法对TiNi/Si复合膜微驱动器的结构设计进行了分析。
- Lastly the Finite Element Method (FEM) is applied to analysis and checking the strength of pipeline. 应用有限元方法来分析校核管线的强度。
- Finite element method (FEM) occupies an important part in Computer Aided Engineering (CAE) methods. 有限元法,也称有限单元法或有限元素法,在计算机辅助工程CAE中占有重要的位置。
- Higher-Order Finite Element for Sandwich Plates. 夹层平板高阶有限元。
- Finite element analysis for complex structure. 复杂结构有限元分析。
- The Finite Element Methods Vol.1 5th ed. 有限元法第1卷第5版。
- Its finite element model is established. 构造了其有限元模型。
- ADINA finite element method are adopted. 采用ADINA 有限元分析软件进行分析。
- Using the finite element analysis software MSC. 摘要采用有限元分析软件MSC.
- The solidification process of liquid metal in the CASTEX technique was studied by FEM(finite element method). 利用有限元法研究了连续铸挤工艺中液态金属的动态凝固过程。
- Finite element method (FEM) is commonly used in analysis of magnetic flux leakage (MFL) of defect of oil pipe. 有限元法广泛应用于石油管道缺陷漏磁场分析,成为替代物理试验,获得大量缺陷漏磁信号的有效手段。
- A novel structure TFPPM motor is presented, and the inductances are calculated by 3D finite element method (FEM). 提出了一种新型结构的横向磁场永磁同步电动机;
- The FEM(Finite Element Method) model of a novel linear motor was established,and then its correction was proofed. 建立了一种新型圆筒直线电机的有限元模型,并验证了有限元模型的正确性。
- Based on in situ data, the permeability field of footwall rocks is evaluated by the finite element method (FEM). 应用现场实验成果,利用有限元方法计算了底板岩体渗流场;
- The main forming process of 7005 aluminum by porthole die is simulated with the FEM(finite element method). 用有限单元法对7005铝合金通过平面分流模成型齿轮泵体型材的主要过程进行了模拟。
- For validation purpose, the finite element method (FEM) analysis was introduced to compare with the result of ESPI. 为求精确性,所以本文引用有限元素分析(FEM)作为比较。