您要查找的是不是:
- Review the technical aspect of the final assembly drawing of the newly developed product. 负责总装夹具设计方案的审查和总装夹具设计制造中的技术协调。
- First establishes the assembly for part model, determines part's specification through the parameter list and the procedure, models the components successively, composes the final assembly drawing. 首先确立部件模型的装配,通过参数表和程序确定部件的规格,依次对零件建模,组装成总装配图。
- Please see the attached ASSEMBLY DRAWING. 外形尺寸请参阅附上的装配图。
- Good understanding in PCBA and final assembly. 熟悉PCBA生产流程和总装流程。
- Master representation methods of assembly drawing. 学习装配图的表达方法。
- The task will then sign the final assembly with the private key. 然后,该任务使用私钥对最终程序集进行签名。
- Is used, the final assembly is signed with the private key. 最终的程序集将用私钥签名。
- The hope is that final assembly in Toulouse can restart in mid-August. 只能寄望于图卢兹的总装配线在八月中旬可以重新恢复。
- Compile all the technique materials for the final assembly of the model. 负责该车型总装所有工艺资料的编制。
- Contact vendor to maintain and develop the equipment of final assembly. 提供总装生产线设备的技术支持;
- The Floating Glass is a element of VFD per assembly drawing, why it is not relavant for VFD ? 按照装配图,平板玻璃是真空荧光显示屏的一个元件, 为什么和真空荧光显示屏无关?
- Always check the assembly drawing for confirmation as tightening torque values on the drawing takes precedence. 因为图纸上的拧紧扭矩值是居先的,始终要对组装图进行检查以达到确认。
- Part mapping and assembly drawings of a tailstock center. 测绘顶尖尾架三维装配体。
- Supervise and inspect the execution of the final assembly technique of each natural workgroup. 督促和检查各自然工作组对总装工艺的执行情况。
- PREPLACE 8 PCS JACKING SCREWS (DRAWING 6) AT THE CORRESPONDING POSITION ACCORDING TO “POURING EPOXY ASSEMBLY” DRAWING. 按“浇注环氧总装图”将八只艉管调整螺栓(图6)预先布置到相应位置处,螺栓头部应不伸入支撑套内部以免影响艉管放入;
- The compiler inserts the public key in the assembly manifest and then signs the final assembly with the private key. 编译器在程序集清单中插入公钥,然后使用私钥对最终的程序集签名。
- The compiler inserts the public key into the assembly manifest and then signs the final assembly with the private key. 编译器将公钥插到程序集清单中,然后用私钥对最终的程序集进行签名。
- We would pass orders for casting and chasing as well (ie: final assembly and patination would be done in France). 我们也会定购翻制和雕镶原产品(例如,最后的组装和上色可以在法国完成)
- Technical support for the PCM final assembly manufacturing and new design manufacturing assumption. 机械支持和新设计生产
- Major in mechanical, ability to read fabrication and assembly drawings. 机械类专业毕业,能看懂机械图纸。