您要查找的是不是:
- filler metal test specimen 填充金属试样
- parent metal test specimen 母材试件,母体金属试样
- all-weld metal test specimen [机] 熔着金属试片
- all weld metal test specimen 所有焊接金属测试样品
- deposited metal test specimen 熔敷金属试样,熔敷金属试件
- base metal test specimen 母材试件,基底金属试样
- Aerospace series - Gold base alloy AU-B40001 - Filler metal for brazing - Wire. 航空航天系列.;金基合金AU-B40001
- Is a wedge test specimen utilized for chill or analysis control? 是否用楔型试块进行分析控制?
- They are readily weldable, in most cases, with or without filler metal. 多数此种合金可焊(不论加或不加焊料金属)。
- Welding consumables - Test methods - Test piece for all-weld metal test specimens in steel, nickel and nickel alloys 焊熔。试验方法。钢,镍和镍合金中所有焊接金属试样用试验片
- However, for attaching nonpressure parts to pressure parts, the filler metal chemistry shall match the nominal chemistry of the pressure part. 但将非受压元件焊接受压元件时所用的填充金属,应与受压元件的标称化学组成相配。
- Influence of Sn and In in silver filler metal on spreadability and joint strength is studied. 研究了银基钎料中元素锡、铟对钎料铺展性能和接头的影响,分析了钎料的显微组织和锡、铟在钎料中的作用机理。
- Welding consumables - Test methods - Part 1: Test methods for all-weld metal test specimens in steel, nickel and nickel alloys 焊料。试验方法。第1部分:钢、镍和镍合金中全焊接金属试样的试验方法
- Cold lap is a condition where the weld filler metal does not properly fuse with the base metal or the previous weld pass material (interpass cold lap). 冷隔?(未熔合)由于熔敷金属没有很好的与母材熔合或没与前道焊缝熔合(层间未熔合)。
- The finite element model of a small punch test specimen of 1Cr0.5Mo steel is established. 基于小冲孔蠕变试验 ;建立 1Cr0 .;5Mo耐热钢小冲孔蠕变试样的有限元模型。
- The spectr al reflectance of each test specimen is measured in situ before and after exp osures. 在辐照前后对每一个试样的光谱反射系数进行了原位测量。
- Abstract: In this paper, the mechanism of electrochemistry corrosion of the tractor radiator brazed with brass (H90 and H70) and Sn-Pb filler metal was investigated. 文摘:研究了采用黄铜(H90、H70)和锡铅钎料钎焊而成的拖拉机水箱电化学腐蚀机理。
- The test specimen shall be immersed in the measuring electrolyte so that the top edge of the area to be measured is level with the surface. 测试样本应浸在电解液中,并使测量区的顶端与液面持平。
- It adopt advanced jointing technique when joint the valve and the copper tube,it brazing filler metal well,without pore and overheating,and has a smooth make and break . 阀体与铜管的连接,采用先进的焊接工艺,钎料到位,无气孔和过烧现象,开闭灵活。