您要查找的是不是:
- file route table 文件路由表
- Adds a static route to the route table. 在路由表中添加一个静态路由。
- The usual bottleneck in a conventional router is the relentless next-hop route table lookup for the constant stream of incoming packets. 常规路由器中常见的瓶颈就是为不断送来的恒定的包流紧张地查找下一跳跃的路由表。
- Will Keep all paths in the routing table B. 在路由选择表中只保留一个路径。
- IP -r Displays the routing table. 显示路由表。
- With QBRT,the forwarding decision is based on a full route table lookup to quickly and accurately determine each packet's next-hop route. 有了QBRT,转发决策是依据完整的路由表查找,快速、精确地决定每个包的下一跳跃路由。
- If the route table lookup shows that the packet is destined for a nonlocal subnet, the router forwards the packet to the next-hop router using the next-hop router's MAC address . 如果查找路由表显示包的目的地不在本地子网,路由器就利用下一跳路由器的MAC地址把包转发给下一跳路由器。
- With QBRT, the forwarding decision is based on a full route table lookup to quickly and accurately determine each packet's next-hop route. 有了qbrt,转发决策是依据完整的路由表查找,快速、精确地决定每个包的下一跳跃路由。
- If the route table lookup shows that the packet is destined for a nonlocal subnet,the router forwards the packet to the next-hop router using the next-hop router's MAC address . 如果查找路由表显示包的目的地不在本地子网,路由器就利用下一跳路由器的MAC地址把包转发给下一跳路由器。
- If the route table lookup shows that the packet is destined for a nonlocal subnet, the router forwards the packet to the next-hop router using the next-hop router's MAC address. 如果查找路由表显示包的目的地不在本地子网,路由器就利用下一跳路由器的mac地址把包转发给下一跳路由器。
- You can control the automatic routing table recalculation interval in the EdgeTransport. Exe. Config application configuration file. 可以在EdgeTransport.;exe
- If the route table lookup shows that the packet is destined for a non-local suet, the router forwards the packet to the next-hop router using the next-hop router\'#39 MAC addre. 如果查找路由表显示包的目的地不在本地子网,路由器就利用下一跳路由器的MAC地址把包转发给下一跳路由器。
- Routing tables keep track of network destinations. 路由表保持对网络目的地的跟踪。
- The Management of the File Route of Data in Delphi Delphi中数据文件路径的管理
- Specify a maximum age for the routing table log files. 指定路由表日志文件的最长期限。
- A routing table maps network prefixes to an outbound interface. 路由表映射网路前置元到一个往外的介面。
- Routers use the routing table to make packet forwarding decisions. 路由器使用路由表来做封包转送的决定。
- The router inspects the packet's IP address and performs a route table lookup to see if the destination end station resides on the local (physically connected) network, typically called an IP subnet . 该路由器检查包的IP地址,查找路由表,看看目的端点是否位于本地(物理位置)网络,它通常叫做IP子网,
- Gets the number of routes that have been discarded from the routing table. 获取已从路由表中丢弃的路由数。
- Describes what protocols are available, not what IP routing table is used. 描述哪些协议可用,而不是使用哪个IP路由表。
- 今日热词
-
- 深远海浮式风电平台 - deep-sea floating wind power platform
-
- 京雄高速公路 - Beijing-Xiongan expressway
-
- 农业及相关产业增加值 - the added value of agriculture and related industries