您要查找的是不是：
- screw stud for feed cam roller 送进滚子轴
- feed cam roller 送进滚子
- Loosen two setscrews 5 in top feed cam 4. 拧松上送布凸轮4和固定螺丝52个螺丝。
- Graduation: laborer rotating, contact roller cam roller cam bearings taper ribbed support of the curve. 分度:出力轴旋转,凸轮滚子接触滚子轴承式凸轮锥度支撑肋的曲线部分。
- When rotating into force, in accordance with the cam roller set displacement curve effort rotating turret, while the ramps along the rib rolling. 当入力轴旋转时，凸轮滚子按照设定的位移曲线旋动出力转塔，而同时又沿肋的斜面滚动。
- The mechanical interface of the cam roller unit, which can be customized to meet OEM requirements, is directly driven by the moving counter surface. 凸轮滚子装置的机械界面可以根据客户要求定制,以便与原有设备制造的要求相符;这个界面直接由移动工作表面驱动。
- Taper support rib usually two or three cam roller contacts, in order to edge into the axis of rotation to be sent to the uniform output shaft. 锥度支撑肋通常与两个或三个凸轮滚子接触，以便入力轴的旋转可均匀地传送到出力轴。
- Turn the top feed cam until it reaches the position to allow the three components such as the throat plate surface, top end of needle eyelet and presser foot (pressing plane) to align, and fix the cam at that position. 在针板上面、针孔上端、中压脚(压脚面)的3点对齐的位置，转动上送布凸轮，然后固定。
- Stop: stop rotating output shaft, cam rollers contact roller cam bearings taper ribbed support of the re-direct. 停止：出力轴停止旋转，凸轮滚子接触滚子轴承式凸轮锥度支撑肋的重直部分。
- The narrow cam rollers have C3 radial internal clearance as standard. 标准的窄凸轮滚子有C3径向内部游隙。
- Roller cam : precision design cam rollers used by the favorite Seiki development of the roller bearings, and its design can withstand heavy-duty. 凸轮滚子：精密设计的凸轮滚子采用由潭子精机开发的滚子轴承，其设计可经受重负荷。
- DESIGN OF THE FEED CAM FOR PROCESSING SCREW THREAD 加工多头螺纹用走刀凸轮设计
- If the taper support ribbed surface and the cam cam rollers have not Sleek, will be for damage to the division. 如果锥度支撑肋的凸轮表面和凸轮滚子之间有不滑顺情况，则会损害到分割器。
- As the two cam roller bearing operation of a continuous taper support rib, from the cam and cam rollers arising from the pressure will help advance the good rotation and to avoid the problem of space. 由于两个凸轮滚子承载一次连续操作的锥度支撑肋，从凸轮和凸轮滚子中产生的预压力将有助于良好的旋转和避免间隙的问题。
- SKF cam rollers are produced to Normal tolerances as standard, except for the tolerance of the crowned runner surface diameter which is twice the Normal tolerance. 标准的SKF凸轮滚子按照标准公差生产,但是球形滚轮表面直径的公差则是标准公差的两倍。
- That boxer is a prodigious feed. 那个拳击家是个大肚汉。
- Unwaged members pay a lower entrance fee. 无固定收入的人入场费从优。
- Cows and sheep depends forage to feed. 牛和羊依靠草料喂养。
- Precision indexing : Taking Seiki special design of the cam rollers for segmentation, can maintain a higher degree of precision segmentation and high torque, to ensure the re-load capability. 高精度的分度：潭子精机特殊设计的凸轮滚子在分割器内，能保持较高的分割精确度和高扭矩时，确保重负载的能力。
- He can barely feed and clothe his family. 他勉强能给予全家人温饱。
