您要查找的是不是：
- The calculated voidage distributions were in good agreement with the test and measurement.Consequently,a proper theory for fast fluidized bed reactor designing and operation optimization is proposed. 并利用实验结果验证它们的可靠性，为快速流化床反应器的设计和优化提供理论基础。
- The technology of fast fluidized beds to exploit vanadium bearing titaniferous ma... 提出了综合利用钒钛铁矿所需采用的快速流化床氯化技术。
- Concentration Profiles in Fast Fluidized Bed with Bluff-Body 内置钝体对快速流化床中颗粒浓度分布的影响
- CALCULATION OF THE AVERAGE VOIDAGE FOR FAST FLUIDIZED BED 快速流化床平均空隙率的计算
- One-dimensional steady-state gas-solids flow model in fast fluidized bed 快速流化床一维轴向稳态流动模型
- Keywords Fast Fluidized Bed;Entrance;Structure;Gas-Solid Flow. Voidage Distribution; 快速流化床;入口结构;气固流动;空隙率分布;
- Spouted fluidized bed is a novel powder granulator. 喷动流化床用于粉体造粒,是一种新型的造粒方法。
- fast fluidized bed [化] 快速流化床
- Material Erosion of Transition Region in Circulating Fluidized Bed. 循环流化床转折区磨损实验研究。
- Experimental on nitrite accumulation in biological fluidized bed. 生物流化床内亚硝酸积累试验。
- On the Recycling Ratio of Circulating Fluidized Bed Boilers. 循环流化床锅炉的循环倍率
- Abstract: Spouted fluidized bed is a novel powder granulator. 摘 要 ：喷动流化床用于粉体造粒，是一种新型造粒方法。
- It is newborn thing that burning technique of Circulating Fluidized Bed. 循环流化床燃烧技术是一门新技术，目前我国的循环流化床锅炉尚处于完善阶段。
- The fluidized bed has both desirable and undesirable characteristics. 流化床的特性，既有有利的一面又有不利的方面。
- The occurrence of electrostatics is an unavoidable phenomenon in fluidized bed. 摘要 综述了流化床静电产生的机理及流化床静电控制的方法。
- Residence times have also been used to characterize the fluidized bed and to interpret conversion data. 停留时间分布模型也早已被用来表示流化床的特征和说明转化率数据。
- Slugging is especially serious in long, narrow fluidized beds. 在细而高的流化床中,腾涌现象特别严重。
- The inventory of solids in a fluidized bed can easily be found by pressure drop measurements across the bed. 流化床内的固定藏量可以用测定床层的压降办法很容易地求得。
- Coal is heated to successively higher temperatures in fluidized beds. 煤在流化床中逐层加热到更高的温度。
- Fluidized bed processing was first used commercially in fluid catalytic cracking of crude oil in 1941. 早在1941年，流化床工艺过程就第一次以工业规模用于原油的流化催化裂化。
