您要查找的是不是：
- The purpose of equal channel angular pressing (ECAP) is to obtain ultra-fine grained (UFG) materials. 摘要等径角挤压是获得块体超细晶材料的一种重要工艺方法。
- Equal channel angular pressing(ECAP) is a promising technology for producing bulk ultra-fine grained(UFG) materials. 等通道转角挤压是能够获得块状超细晶组织的一种新的材料加工方法。
- Semi-hard magnetic 2J4 alloy was fabricated via Equal Channel Angular Pressing(ECAP). 开发了用等径弯曲通道变形(ECAP)制备半硬磁2J4合金。
- The purpose of equal channel angular pressing(ECAP) is to obtain the ultra-fine grained(UFG) materials. 等径角挤压是获得块体超细晶材料的一种重要方法。
- Abstract: The purpose of equal channel angular pressing (ECAP) is to obtain ultra-fine grained (UFG) materials. 摘 要: 等径角挤压是获得块体超细晶材料的一种重要工艺方法。
- Semi-hard magnetic 2J4 alloy was fabricated via Equal Channel Angular Pressing (ECAP). 摘要开发了用等径弯曲通道变形(ECAP)制备半硬磁2J4合金。
- The effect of ECAP passes on materials mechanical properties of industrial pure aluminum L2 was investigated with equal channel angular pressing (ECAP) process . 利用等通道转角挤压(ECAP)技术挤压工业纯铝L2,探讨了挤压次数对其力学性能的影响。
- Equal channel angular pressing (ECAP) was applied to the as-extruded AZ91 alloy and SiCp/AZ91 composite fabricated by the stir casting, respectively. 本文对挤压态AZ91镁合金和挤压态SiCp/AZ91复合材料进行了等通道角挤压变形(ECAP)。
- This paper puts forward a new processing way, equal channel angular pressing (ECAP), to improve the magnetic retardation of FeCoV alloy. 本文提出了一种新的加工变形方法即等径弯曲通道变形法(Equal Channel Angular Pressing,简称ECAP)来制备超细晶磁性材料。
- Effects of annealing temperature on mechanical properties and microstructure of Fe17.80Mn4.73Si7.80Cr4.12Ni alloy fabricated by equal channel angular pressing(ECAP) were studied. 研究了退火温度对等通道转角挤压(ECAP)Fe17.;80Mn4
- Buck of ultra-fine grain (submicrostructured or na-nostructured materials) materials could be acquired by equal channel angular pressing (ECAP) with enough deformation. 通过等通道弯角挤压(Equal channel angular pressing,ECAP)工艺累积足够的变形制备块状超细晶粒材料(亚微米或纳米微观结构材料)。
- The method of equal channel angular pressing (ECAP) is one of the methods of severe plastic defromation, which is used to prepare bulk ultrafine-grained materials. 等径角挤压法(equal channel angular pressing，ECAP)是大塑性变形(severe plastic deformation，SPD)制备超细晶材料的方法之一。
- ECAP (Equal Channel Angular Pressing) is a technique subjecting materials to extensive deformation by simple shear and used to make an ultra-fine grained board and stick. 等通道转角挤压技术(Equal Channel Angular Pressing，简称ECAP)，是一种通过简单的剪切原理使材料产生强烈的塑性变形，从而实现制备超细晶块体或棒体材料的有效方法。
- A new continuous equal channel angular pressing(ECAP) technique was developed and successfully produced unlimited length of pure aluminum with ultrafine grain. 探讨一种连续等通道角挤压(ECAP)新技术,实现了纯铝的无限长度连续大变形,制备出具有超细晶结构的金属材料。
- Abstract: A new continuous equal channel angular pressing (ECAP) technique was developed and successfully produced unlimited length of pure aluminum with ultrafine grain. 摘 要: 探讨一种连续等通道角挤压（ECAP）新技术, 实现了纯铝的无限长度连续大变形, 制备出具有超细晶结构的金属材料。
- The influence of Equal Channel Angular Pressing (ECAP) deformation on the microstructure and magnetic properties of a semi-magnetic alloy, 2J4, was studied. 摘要研究了等径弯曲通道变形(ECAP)对2J4合金显微组织和磁性能的影响。
- The deformation modes during the process of equal channel angular pressing (ECAP) of Mg-8Li-lAl (mass fraction, %) alloy were discussed using the results of X-ray diffraction analyses. 以X射线衍射分析术为主要分析手段;探讨了双相合金Mg-8Li-1Al(质量分数; %25)在等通道转角挤压(ECAP)变形过程中的变形方式.
- The test of 8 pass cold extrusion of equal channel angular pressing (ECAP) with ratio of extrusion reduction 1.02 of each pass for 00Cr18Ni12 austenite stainless steel has been carried out. 对 0 0Cr18Ni12奥氏体不锈钢进行道次变形量为 1.;0 2的 8道次的等通道冷挤压试验。
- Q235 steel is successfully processed by equal channel angular pressing up to a total of 11 passes via route C at room temperature, and the submicrometer grained ferrite microstructure is obtained. 在室温下对Q235钢成功进行了C方式11道次等径弯曲通道,等效应变约高达11,获得了亚微晶铁素体组织。
- Equal Channel Angular Pressing (ECAP) is one kind of severe plastic deformation methods, which can produce ultra-fine grain structures, improve materials properties and forming ability. 等通道转角挤压(ECAP)是一种大塑形加工技术,可细化合金组织,改善性能,提高材料的成形性。
