您要查找的是不是:
- siloxane modified epoxy acrylate prepolymer 有机硅改性环氧丙烯酸光敏预聚物
- epoxy acrylate prepolymer 环氧丙烯酸酯预聚体
- Through vulcanization curves evaluation ammonium benzoate was selected as the vulcanizing agent of epoxy acrylate rubber (EACM). 通过硫化曲线评定,选用苯甲酸铵作硫化剂对环氧型丙烯酸酯橡胶低温胶进行硫化。
- Adipic acid modified epoxy acrylate pigment wetting and dispersing agent is synthesized. 合成了己二酸改性环氧丙烯酸酯颜料润湿分散剂;
- Development of Modified Epoxy Acrylate for UV-curing Photosensitive Prepolymer 紫外光固化环氧丙烯酸酯光敏预聚物改性研究进展
- Epoxy acrylates are the workhorses of the industry. 环氧丙烯酸酯是这个产业的主流。
- Epoxy acrylate (EA) resin is an important photosensitive resin, in which bisp henolic epoxide was most widely used in the field of UV curing coating. 环氧丙烯酸(EA)树脂在辐射固化领域中是一种重要的感光树脂,其中双酚A型环氧树脂的应用最为广泛。
- The photocuring process of epoxy acrylate resin was studied by differential photo-calorimetric(DPC) method in this paper. 采用光差扫描量热法考察了环氧丙烯酸酯的光固化动力学行为。
- To compare with epoxy acrylate, the film of modified epoxy acrylate have been improved more markedly on flexibility, glossiness and adhesive force. 和未改性树脂相比,涂膜的柔韧性显著提高,光泽度增加,附着力变好。
- Research progress of UV-curable oligomers which were mainly epoxy acrylate resin and polyurethane acrylate were reviewed. 摘要综述了UV固化低聚物(主要是环氧丙烯酸酯和聚氨酯丙烯酸酯)的研究进展。
- The title UV curing coatings is prepared based on epoxy acrylate, reactive diluents and photoinitiator.The main raw materials and cured film are tested with TGA. 以环氧丙烯酸酯、活性稀释单体、光引发剂等为原料,制备UV固化涂层,对主要原料及固化后的涂层进行了热失质量分析。
- The UV curable coating of fiber ribbon was prepared by blending bisphenol A epoxy acrylate(EA) and polyurethane acrylate(PUA)and adding reactive diluent,photoinitiator and pigment. 采用双酚A环氧丙烯酸酯(EA)和聚氨酯丙烯酸酯(PUA)共混,加入活性稀释剂、光引发剂、颜料等制备了紫外光固化光纤涂料。
- An acrylic alkyd was produced via monoglyceride, in which acrylic prepolymer containing carboxyl with small molecular weight was applied as a modifier. 摘要采用单甘油酯法成功地制备出表干快、硬度高、耐候性好的丙烯酸改性醇酸树脂自干型涂料,可满足户外大型钢结构的涂装要求。
- The result of performance test showed that the maleic anhydride and polyethylene glycol 400 monoester was the best to improve the viscosity of epoxy acrylate and the best mule ratio was 0.1. 实验结果表明:马来酸聚乙二醇400单酯改善体系黏度的效果最好且与环氧树脂的当量比为0.;1:1时最佳;
- A polyurethane acrylic prepolymer (PUA) has been developed based on HDI trimer and hydroxylethyl acrylate (HEA), which shows the characteristics of bright color, high functionality, and fast curing. 以HDI三聚体与丙烯酸乙酯 (HEA)为原料 ,制备了颜色浅、官能度高、固化速度快的新型聚氨酯丙烯酸酯(PUA)预聚物。
- Appl yin g VS/MA copolymer with epoxy acrylate and pentaerythritol triacrylate as a photo sensitive resin, it can give a clear image after UV expose and developing with alkaline water. 应用乙烯基螺环原酯/马来酸酐共聚物与改性环氧 丙烯酸酯和季戊四醇三丙烯酸酯组成感光树脂,经曝光和碱水显影加工可获得清晰的图像。
- The synthesis of unsaturated acrylic prepolymer design of coatings formulation and influencing factors are discussed.The properties of coatings film are characterized. 本文讨论了不饱和丙烯酸酯树脂的合成和涂料的配方设计,并对涂膜性能进行了表征,讨论了影响涂料性能的因素。
- Based on the principle of HLB, a scheme of epoxy acrylate modified with maleic anhydride was designed, and carboxylated acrylate epoxy with good water dispersity was synthesized successfully. 根据亲水亲油平衡值(HLB)设计了以马来酸酐改性环氧丙烯酸酯的方案,合成了具有良好水分散性的羧基化环氧丙烯酸酯树脂。
- The photocurable carboxylated epoxy acrylate(CEA) resins were synthesized via the reaction between hydroxyl group on epoxy acrylate resin(EA) and polybasic carboxylic acid anhydride, e. 将环氧丙烯酸树脂分别和5种多元羧酸酐反应,得羧基化环氧丙烯酸酯(CEA)树脂,实验了6种催化剂,其中以四甲基溴化铵的效果较为理想。
- Photoimage etching ink made up by alkali developable novolak epoxy acrylic resin had better alkali developable. 用酚醛环氧丙烯酸型碱溶性树脂制备光成像抗蚀油墨,具有较佳的碱显影性能。