您要查找的是不是：
- end face flux 正面通量
- Metope, end face, window make gout change. 墙面、顶面、窗户等做趣味变化。
- Basically use at material of condole end face. 主要用于吊顶面材。
- Lubricationhole is in the end face at theribbed end of the tsud only. 油孔公在螺栓挡边端端面上。
- It is spread on end face of extruded shim to make shim separate with discard. 涂于挤压垫片端面，使垫片与压余分离。
- The smoothness of that shaft 's end face reaches the required criteria. 某轴体的端面其平坦度符合应达到的标准.
- With the face grinding attachment, perpendicularity of the end face to the bore after grinding can guaranteed. 带有端磨装置，保证工件端面与孔的垂直度。
- The penstock chooses end face integral seal and the seal material is special rubber, which makes the seal safety and durable. 闸门采用端面整体密封，密封材料采用特殊橡胶材料，保证密封牢靠、耐用。
- This hexahedral included end face, all around establish face and underside 6 place. 这个六面体包括了顶面、四面的立面和底面六个部位。
- This special fixture can be used to machine inner bore,excircle,and end face,and also can be repeatedly used. 该夹具可完成内孔、外圆、端面的加工,还可重复使用。
- It is spread on end face of extruded shim to make shim separate with discard. 3. 2、涂于挤压垫片端面，使垫片与压余分离。
- This hexahedral included end face, all around establish 6 position such as face and underside. 这个六面体包括了顶面、四面的立面和底面等六个部位。
- After technology improvement, the used material reduces, and the crack, shrinkage cavity of end face and puckering don't exist in the furcation part. 工艺改进后，材料减少，原来存在的裂纹、缩口以及接头处参差不齐的问题得到彻底地解决。
- Tonal and main be to pass the ground, metope, end face to reflect, and adornment, furniture rise only adjust, additional action. 色调主要是通过地面、墙面、顶面来体现的，而装饰品、家具等只起调剂、补充的作用。
- The reverse-drawing process in the combination stamping forming for a squirrelcage unclosed end face covering and a closed one was analyzed. 分析了鼠笼端面透盖和闷盖冲压组合成形反拉深工艺,介绍了反拉深模具设计要点,计算了反拉深模的冲压力,设计了拉深模和反拉深模。
- The house that two couplet are discharged and builds covers an area of about 3 mus, wall body is virescent, end face is dazzling red tile. 两栋联排而建的房屋占地约3亩，墙身淡绿色，顶面是耀眼的红瓦。
- The temperature of the crystal is the lowest, and the shape changed of the end face is the smallest by using the end surface hydrocooling method. 三种冷却方式中，泵浦端水冷情况下晶体温度最低，端面形变量最小。
- The accident put an untimely end to the party. 意外事故使聚会匆匆结束了。
- The boys were itching for the lesson to end. 那些男孩子们渴望下课。
- It is lightly spread on end face of flat die cavity (without fluid guide hole) to make extruded solid profile separate automatically. 轻涂于平模(没有导流孔)模具型腔端面，使挤压的实心型材自动分离。
