您要查找的是不是：
- The experimental results shown that the elastic limit stress, the Yang's modulus and the brittleness of SFRC were increasing when the temperature decrease. 试验结果表明随着温度的下降,材料的极限强度提高,杨氏模量上升,脆性加大。
- Evaluating the elastic limit stress of different post-core systems 桩核修复体弹性极限应力的实验研究
- Keywords post-core systems;elastic limit stress;luting cements; 桩核修复体;弹性极限应力;粘接材料;
- elastic limit stress 弹性极限应力
- Torsion deformation is the biggest effect factor on elastic limit equivalent stress. 扭转变形是对钢丝的弹性极限等效应力情况影响最大的因素。
- Tiny deformation will appear in the local of the propeller shaft of certain ship which is endured an invariableness load, although the shaft stress is within the elastic limit range. 某舰的螺旋桨尾轴长期处在恒定载荷作用下，虽然尾轴应力在弹性极限范围内，但是尾轴局部还是很容易发生微量的塑性变形。
- Objective To investigate the elastic limit and relevant enclasp force of the non-precious metal wrought wire clasp. 目的研究非贵金属锻丝卡环的弹性极限及其相应卡抱力。
- The elastic limit is the maximum stress for which the material acts elastically. 材料产生弹性作用时所对应的最大应力，称为弹性极限。
- When a material is stressed byong the elastic limit a permaent deformation results. 当一种材料的应力超过弹性极限时,就会产生永久变形。
- Objective To investigate the elastic limit and relevant enclasp force of the non-precious metal casting clasp. 目的 研究非贵金属铸造卡环的弹性极限及其相应卡抱力。
- It is revealed that pre-stressing of fibers could effectivelyincrease the elastic limit,yielding strength and fracture strength of VIRALL Iaminates. 结果表明，纤维预拉伸应力能有效地提高VIRALL复合板的弹性极限、屈服强度以及断裂强度。
- ABSTRACT: Objective To investigate the elastic limit and relevant enclasp force of the nonprecious metal wrought wire clasp. 摘要:目的研究非贵金属锻丝卡环的弹性极限及其相应卡抱力。
- Stresses beyond its elastic limit cause the material to yield, or flow, and the result is permanent deformation or breakage. 超出弹性极限的应力将引起材料屈服或流变，结果产生永久形变或断裂。
- Within the elastic limit of the material,the relation between the retention of gold alloy clasp and the depth of abutment undercut showed positive correlation. 在卡环弹性极限内,金合金卡环固位力与卡环臂进入基牙倒凹的深度成正比。
- The paper aims at the maximum axial load,showing that the maximum axial load determined by the shakedown limit is much larger than that by the elastic limit. 本文尝试着进行一些探讨，提出应以钢轨的安定极限值代替钢轨的弹性极限值作为钢轨的许用极限值，并就此进行了理论计算及实验分析工作，提出了一些有益的结论。
- This paper overviewed the prediction methods of forming limit in sheet metal forming, which included forming limit stress diagram, the maximum forming thinning ratio, forming limit diagram and ductile fracture criteria(DFC). 摘要对板料成形中的成形极限应力图、最大变薄率、成形极限图以及韧性断裂准则等预测成形极限的方法，进行了综述和分析。
- Stress can be the undoing of so many fine players. 紧张可能是这许多优秀选手失败的原因。
- The elastic limiting pressure of the cylinder was gained by analyzing the experimental data. 通过对该实验数据的分析得到了圆筒的弹性极限压力。
- The dynamic yield strength and elastic constants of 2# armco-iron and stainless steel at HEL(Hugoniot Elastic Limit) Point were determined by using the shock compression technique. 由2~%23纯铁和不锈钢的冲击压缩实验,确定了它们在HEL(雨贡纽弹性极限)点上的动力学屈服强度和弹性常数。
- The elastic limit and the relevant enclasp force of the casting clasp made from the l 8-8 nickel-chromium alloy were smallest and those of the clasps made from the cobalt-chromium alloys in various brands were different. 不同品牌的钴铬合金铸造卡环弹性极限及其相应卡抱力不同 ,18 8镍铬不锈钢铸造卡环的弹性极限及其相应卡抱力最低。
